期刊检索

  • 2026年第58卷
  • 2025年第57卷
  • 2024年第56卷
  • 2023年第55卷
  • 2022年第54卷
  • 2021年第53卷
  • 2020年第52卷
  • 2019年第51卷
  • 2018年第50卷
  • 2017年第49卷
  • 2016年第48卷
  • 2015年第47卷
  • 2014年第46卷
  • 2013年第45卷
  • 2012年第44卷
  • 2011年第43卷
  • 2010年第42卷
  • 第1期
  • 第2期

主管单位 中华人民共和国工业和信息化部 主办单位 哈尔滨工业大学 主编 李隆球 国际刊号ISSN 0367-6234 国内刊号CN 23-1235/T

期刊网站二维码
微信公众号二维码
引用本文:丁自豪,雷川鹤,郑史雄,贾宏宇,陈志强,许智.锈蚀RC柱水平抗力的机器学习预测及参数敏感性分析[J].哈尔滨工业大学学报,2024,56(11):80.DOI:10.11918/202310012
DING Zihao,LEI Chuanhe,ZHENG Shixiong,JIA Hongyu,CHEN Zhiqiang,XU Zhi.Machine learning prediction and parameter sensitivity analysis for lateral capacity of corroded RC columns[J].Journal of Harbin Institute of Technology,2024,56(11):80.DOI:10.11918/202310012
【打印本页】   【HTML】   【下载PDF全文】   【查看/发表评论】  【下载PDF阅读器】  【关闭】
过刊浏览    高级检索
本文已被:浏览 698次   下载 387次 本文二维码信息
码上扫一扫!
分享到: 微信 更多
锈蚀RC柱水平抗力的机器学习预测及参数敏感性分析
丁自豪1,2,雷川鹤1,2,郑史雄1,2,贾宏宇1,2,陈志强3,许智1,2
西南交通大学 土木工程学院,成都 610031;桥梁智能与绿色建造全国重点实验室(西南交通大学),成都 611756;成都大学 建筑与土木工程学院,成都 610106
摘要:
为实现地震作用下破坏模式未知锈蚀RC柱的水平抗力快速预测,基于机器学习(ML)方法对锈蚀矩形RC柱的剩余水平抗力开展研究。首先,确定ML模型的输入参数,建立锈蚀矩形RC柱数据集,并对输入参数之间的相关性进行分析;然后,选择6种代表性ML算法(SVM、KNN、ANN、CNN、RF和CatBoost),搭建锈蚀RC柱的水平抗力ML模型,并采用网格搜索或试错法对模型的超参数进行优化,基于5折-交叉验证确定了ML模型的最优超参数;最后,根据4个常用的回归评估指标(EMA、ERMS、EMAP和R2)与测试集,对6种ML模型的预测精度进行评估,并基于性能优异的ML模型开展了输入参数重要性排序以及参数敏感性分析。结果表明:神经网络模型的预测性能普遍优于集成类或其他单一类模型,其中ANN模型的预测效果最佳,其预测值与试验值之比的均值和标准差分别为1.01和0.14;剪跨比对锈蚀矩形RC柱的水平抗力影响最大且较为显著,重要性占比可高达35%;矩形RC柱的水平抗力随着剪跨比、箍筋间距与截面有效高度比以及钢筋锈蚀率的增加呈减小趋势,而随着轴压比的增加呈先增大后趋于稳定或减小趋势。
关键词:  钢筋混凝土柱  锈蚀  地震作用  水平抗力  机器学习
DOI:10.11918/202310012
分类号:TU375.3;TU311.41
文献标识码:A
基金项目:国家自然科学基金(52178169);国家重点研发计划(2021YFB1600300)
Machine learning prediction and parameter sensitivity analysis for lateral capacity of corroded RC columns
Zihao DING1,2, Chuanhe LEI1,2, Shixiong ZHENG1,2, Hongyu JIA1,2, Zhiqiang CHEN3, Zhi XU1,2
School of Civil Engineering, Southwest Jiaotong University, Chengdu 610031, China;State Key Laboratory of Bridge Intelligent and Green Construction (Southwest Jiaotong University), Chengdu 611756, China;School of Architecture and Civil Engineering, Chengdu University, Chengdu 610106, China
Abstract:
To achieve rapid lateral capacity prediction of corroded RC columns without specific failure modes under seismic action, residual lateral capacity of corroded rectangular RC columns has been investigated based on machine learning (ML) methods. First, the input parameters for the ML model were determined, the dataset of corroded rectangular RC column was reorganized and correlations among the input parameters were analyzed. Then, six typical ML algorithms, including SVM, KNN, ANN, CNN, RF and CatBoost, were selected to establish the ML models for lateral capacity of corroded RC columns, and the hyper-parameters of ML models were optimized and determined using grid search or trial-and-error methods as well as 5-fold cross-validation. Finally, the predictive accuracy of the six ML models was evaluated based on four widely-used regression evaluation metrics (EMA, ERMS, EMAP and R2) and testing set, and the importance ranking of input parameters and parameter sensitivity analysis were carried out based on the excellent ML models. Results show that the predictive performance of neural network models is generally better than that of ensemble models or other single models, in which ANN model is more satisfactory, and the mean and standard deviation of the ratio of its predicted result to experimental value are 1.01 and 0.14, respectively. Shear-span ratio has the highest and significant effect on the lateral capacity of corroded rectangular RC columns, with an importance of up to 35%. The lateral capacity of rectangular RC columns decreases with the increase of shear-span ratio, the ratio of stirrup spacing to section effective height and corrosion level, but increases at first and then tends to stabilize or decrease with the increase of axial load ratio.
Key words:  reinforced concrete column  corrosion  seismic action  lateral capacity  machine learning

友情链接LINKS