| 引用本文: | 郭维诚,张海龙,郭淼现,丁子珊.高低体积SiCp/Al磨削损伤形成及表面形貌研究[J].材料科学与工艺,2026,34(5):33-45.DOI:10.11951/j.issn.1005-0299.20250097. |
| GUO Weicheng,ZHANG Hailong,GUO Miaoxian,DING Zishan.Grinding damage and surface morphology of SiCp/Al composites with high and low volume fractions[J].Materials Science and Technology,2026,34(5):33-45.DOI:10.11951/j.issn.1005-0299.20250097. |
|
| 摘要: |
| SiCp/Al复合材料作为典型的颗粒增强金属基复合材料,因其优异的综合性能被广泛应用于航空航天与精密电子等领域。然而,SiCp/Al材料中SiC颗粒的分布特性对其磨削加工过程中的损伤行为和表面质量影响显著。为此,本研究针对不同体积分数的SiCp/Al复合材料,开展了二维磨削仿真与实验研究,基于颗粒磨粒相对位置的颗粒去除机制,揭示了不同工艺参数下的主要表面损伤形式,进行了工艺参数对磨削力与表面粗糙度的敏感性分析;最终构建表面粗糙度经验预测模型。研究结果表明,两种材料主要损伤为颗粒破碎与凹坑,高体积分数材料由于颗粒尺寸偏大,更易产生基体涂覆现象,且损伤形式受颗粒的去除机制影响;低体积分数材料中,磨削深度对表面粗糙度影响显著,砂轮速度次之,而在高体积分数材料中,砂轮速度对表面质量变化影响最大;在两种体积分数材料中,砂轮速度对磨削力影响呈负相关,磨削深度和进给速度对磨削力影响呈正相关。 |
| 关键词: SiCp/Al 磨削损伤 磨削力 表面形貌 表面粗糙度 |
| DOI:10.11951/j.issn.1005-0299.20250097 |
| 分类号:TB333 |
| 文献标识码:A |
| 基金项目:国家自然科学基金资助项目(52475478). |
|
| Grinding damage and surface morphology of SiCp/Al composites with high and low volume fractions |
|
GUO Weicheng,ZHANG Hailong,GUO Miaoxian,DING Zishan
|
|
(School of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China)
|
| Abstract: |
| As a typical particle-reinforced metal matrix composite, SiCp/Al composites are widely used in aerospace and precision electronics due to their excellent comprehensive properties. However, the distribution characteristics of SiC particles in SiCp/Al materials significantly affect the damage behavior and surface quality during grinding processes. This study conducts two-dimensional grinding simulations and experimental investigations on SiCp/Al composites with different volume fractions. Based on the relative positions between particles and abrasives, the particle removal mechanisms are explored, and the dominant surface damage modes under various processing parameters are identified. Furthermore, a sensitivity analysis of process parameters on grinding force and surface roughness is performed, and an empirical model for predicting surface roughness is established. The results show that the primary damage modes for both materials are particle fracture and pit formation. In high-volume fraction materials, larger particle sizes tend to cause matrix smearing, and the damage modes are influenced by the particle removal mechanisms. For low-volume fraction materials, grinding depth has the most significant impact on surface roughness, followed by wheel speed, whereas for high-volume fraction materials, wheel speed plays a more critical role in surface quality. In both types of materials, wheel speed shows a negative correlation with grinding force, while grinding depth and feed rate exhibit a positive correlation. |
| Key words: SiCp/Al composites grinding-induced damage grinding force surface topography surface roughness |