| 引用本文: | 唐亮,袁思思,姜政志,朱平,尚诗,上官文斌.太阳能电池低温固化浆料的性能影响因素[J].材料科学与工艺,2026,34(5):23-32.DOI:10.11951/j.issn.1005-0299.20250046. |
| TANG Liang,YUAN Sisi,JIANG Zhengzhi,ZHU Ping,SHANG Shi,SHANGGUAN Wenbin.Influencing factors on the performance of low-temperature curing paste for solar cells[J].Materials Science and Technology,2026,34(5):23-32.DOI:10.11951/j.issn.1005-0299.20250046. |
|
| |
|
|
| 本文已被:浏览 400次 下载 28次 |
 码上扫一扫! |
|
|
| 太阳能电池低温固化浆料的性能影响因素 |
|
唐亮1,袁思思1,姜政志2,朱平2,尚诗1,上官文斌3
|
|
(1.北京林业大学 工学院,北京 100083; 2.广州三孚新材料科技股份有限公司,广州 510700;3.华南理工大学 机械与汽车工程学院,广州 510621)
|
|
| 摘要: |
| 导电浆料的性能受多种因素影响,其中导电相的选择、银粉的粒径和形貌,以及不同银粉的混合比例等因素影响显著。为提高太阳能电池低温固化浆料的经济性能和导电性能,本文研究了不同导电相(银粉、铜粉和银包铜粉)对导电浆料性能的影响,以及不同银粉粒径和形貌对导电银浆性能的影响,进一步分析了不同粒径、形貌银粉的混合比例对浆料导电性的优化作用,并基于分子动力学模拟了不同粒径和形貌银粉混合对烧结性能的影响,揭示烧结过程中的微观机制。结果表明:不同导电相所制备的浆料中,银浆导电性能最好,银包铜浆导电性能次之,铜浆导电性能最差;不同导电银浆中,微米片状银浆导电性能最好,纳米球形银浆导电性能次之,微米球形银浆导电性能最差;在微米球形银粉中,混合纳米银粉含量为6%时导电性能最好,混合片状银粉含量为8%时导电性能最好,且均优于单一微米球形导电银浆;通过分子动力学仿真模拟同样证明,在微米球形银粉中混合纳米银粉或片状银粉有助于提高银浆的导电性能,降低孔隙率。 |
| 关键词: 太阳能电池 低温固化 银粉 银浆 导电性 |
| DOI:10.11951/j.issn.1005-0299.20250046 |
| 分类号:TB383.1 |
| 文献标识码:A |
| 基金项目:国家自然科学基金青年基金资助项目(52402441). |
|
| Influencing factors on the performance of low-temperature curing paste for solar cells |
|
TANG Liang1,YUAN Sisi1,JIANG Zhengzhi2,ZHU Ping2,SHANG Shi1,SHANGGUAN Wenbin3
|
|
(1.School of Technology, Beijing Forestry University, Beijing 100083, China; 2.Guangzhou Sanfu New Materials Technology Co., Ltd., Guangzhou 510700, China; 3.School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510621, China)
|
| Abstract: |
| The performance of conductive pastes is influenced by various factors, including the selection of conductive phases, the particle size and morphology of silver powder, and the mixing ratio of different silver powders. In order to enhance the cost-effectiveness and electrical conductivity of low-temperature curable pastes for solar cells, this study investigates the effects of different types of conductive phases (silver powder, copper powder, and silver-coated copper powder) on the properties of conductive pastes. Additionally, it examines the impact of silver powder particle size and morphology on the performance of silver pastes, and further analyzes the optimization effect of varying the mixing ratios of silver powders with different particle sizes and morphologies on the conductivity of the pastes. The study also uses molecular dynamics simulations to explore the influence of different silver powder particle sizes and morphologies on the sintering performance, revealing the underlying mechanisms during the low-temperature sintering process. The results indicate that among the pastes prepared with different conductive phases, silver paste exhibits the best conductivity, followed by silver-coated copper powder-based paste, and copper paste shows the worst conductivity. Among the different conductive silver pastes, micron flake silver paste demonstrates the best conductivity, followed by nano spherical silver paste, while micron spherical silver paste exhibits the worst conductivity. In the case of micron spherical silver powder-based paste, the best conductivity is achieved when the content of nano silver powder is 6%; similarly, when the content of flake silver powder in micron spherical silver powder-based paste is 8%, the conductivity is also optimized. Both of these formulations are superior to the pure micron spherical conductive silver paste. Molecular dynamics simulations similarly confirm that mixing nano silver powder or flake silver powder with micron spherical silver powder enhances the conductivity of the silver paste and reduces its porosity. |
| Key words: solar cell low temperature curing silver powder silver paste electrical conductivity |
|
|
|
|