期刊检索

  • 2026年第34卷
  • 2025年第33卷
  • 2024年第32卷
  • 2023年第31卷
  • 2022年第30卷
  • 2021年第29卷
  • 2020年第28卷
  • 2019年第27卷
  • 2018年第26卷
  • 2017年第25卷
  • 2016年第24卷
  • 2015年第23卷
  • 2014年第22卷
  • 2013年第21卷
  • 2012年第20卷
  • 2011年第19卷
  • 2010年第18卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 中国材料研究学会
哈尔滨工业大学
主编 苑世剑 国际刊号ISSN 1005-0299 国内刊号CN 23-1345/TB

期刊网站二维码
微信公众号二维码
引用本文:王佑宾,高清帅,姜薄士,周楷涵,王宁,吴哲.短切碳纤维增强镁基复合材料的力学性能研究[J].材料科学与工艺,2026,34(5):15-22.DOI:10.11951/j.issn.1005-0299.20250067.
WANG Youbin,GAO Qingshuai,JIANG Boshi,ZHOU Kaihan,WANG Ning,WU Zhe.Mechanical properties of magnesium matrix composites reinforced with short-cut carbon fibers[J].Materials Science and Technology,2026,34(5):15-22.DOI:10.11951/j.issn.1005-0299.20250067.
【打印本页】   【HTML】   【下载PDF全文】   【查看/发表评论】  【下载PDF阅读器】  【关闭】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 366次   下载 39次 本文二维码信息
码上扫一扫!
短切碳纤维增强镁基复合材料的力学性能研究
王佑宾,高清帅,姜薄士,周楷涵,王宁,吴哲
(东北林业大学 机电工程学院,哈尔滨 150040)
摘要:
短切碳纤维(SCFs)是一种高性能纤维,其密度为1.7~2.1 g/cm3,与镁合金的密度相近,并且短切碳纤维还表现出良好的导热性和极高的比强度。本文采用固相合成工艺制备挤压态AZ31镁合金及2% SCFs/AZ31镁基复合材料,利用光学显微镜、扫描电子显微镜、力学拉伸等方法探究固相合成工艺技术对镁基复合材料的微观形貌、界面结合以及力学性能的影响。结果表明,经过固相合成工艺制备得到的挤压态AZ31镁合金的力学性能得到了明显的改善,其屈服强度和抗拉强度相较于铸态AZ31镁合金分别提升了10%和16%。2% SCFs/AZ31镁基复合材料的力学性能相较于挤压态AZ31镁合金有所提升,其屈服强度和抗拉强度分别提升了7%和2%。本文研究结论可为高性能镁基复合材料制备开发提供一定的理论基础和实验依据。
关键词:  固相合成工艺  镁合金  SCFs/AZ31复合材料  微观结构  力学性能
DOI:10.11951/j.issn.1005-0299.20250067
分类号:TH142.3
文献标识码:A
基金项目:国家自然科学基金资助项目(52371102).
Mechanical properties of magnesium matrix composites reinforced with short-cut carbon fibers
WANG Youbin, GAO Qingshuai, JIANG Boshi, ZHOU Kaihan,WANG Ning,WU Zhe
(College of Electromechanical Engineering, Northeast Forestry University,Harbin 150040,China)
Abstract:
Short-cut carbon fibers (SCFs) are high-performance fibers with a density of 1.72.1 g/cm3, which is similar to that of magnesium alloys, and SCFs also exhibit good thermal conductivity and very high specific strength. In this paper, extruded AZ31 magnesium alloy and short cut carbon fibers (SCFs/AZ31) magnesium matrix composites with a mass fraction of 2% are prepared by a solid phase synthesis process, and the effects of the solid phase synthesis process technology on the microscopic morphology, interfacial bonding, and mechanical properties of the magnesium matrix composites are investigated by using the experimental methods of optical microscopy, scanning electron microscopy, and mechanical tensile testing. The experimental results show that the mechanical properties of the extruded AZ31 magnesium alloy prepared by solid-phase synthesis process have been significantly improved, and its yield and tensile strengths have been increased by 10% and 16%, respectively, compared with those of the cast AZ31 magnesium alloy. The mechanical properties of magnesium matrix composites with the addition of short-cut carbon fibers have been improved compared to the extruded state AZ31 magnesium alloy, with the yield strength and tensile strength increased by 7% and 2%, respectively. The findings of this paper can provide a certain theoretical basis and experimental basis for the preparation and development of high-performance magnesium matrix composites.
Key words:  solid-phase synthesis process  magnesium alloys  SCFs/AZ31 composites  microstructure  mechanical properties

友情链接LINKS