期刊检索

  • 2026年第34卷
  • 2025年第33卷
  • 2024年第32卷
  • 2023年第31卷
  • 2022年第30卷
  • 2021年第29卷
  • 2020年第28卷
  • 2019年第27卷
  • 2018年第26卷
  • 2017年第25卷
  • 2016年第24卷
  • 2015年第23卷
  • 2014年第22卷
  • 2013年第21卷
  • 2012年第20卷
  • 2011年第19卷
  • 2010年第18卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 中国材料研究学会
哈尔滨工业大学
主编 苑世剑 国际刊号ISSN 1005-0299 国内刊号CN 23-1345/TB

期刊网站二维码
微信公众号二维码
引用本文:高云琴,白俊峰,王佳乐,马高茹,尹昊,蔡金桦.白榴石的制备及其对莫来石-刚玉质材料抗侵蚀性能的影响[J].材料科学与工艺,2026,34(3):72-79.DOI:10.11951/j.issn.1005-0299.20240198.
GAO Yunqin,BAI Junfeng,WANG Jiale,MA Gaoru,YIN Hao,CAI Jinhua.Preparation of leucite and its effect on the corrosion resistance of mullite-corundum materials[J].Materials Science and Technology,2026,34(3):72-79.DOI:10.11951/j.issn.1005-0299.20240198.
【打印本页】   【HTML】   【下载PDF全文】   【查看/发表评论】  【下载PDF阅读器】  【关闭】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 932次   下载 77次 本文二维码信息
码上扫一扫!
白榴石的制备及其对莫来石-刚玉质材料抗侵蚀性能的影响
高云琴1,2,白俊峰1,2,王佳乐2,马高茹2,尹昊2,蔡金桦2
(1.矿区生态修复与固废资源化厅市共建山西省重点实验室培育基地,山西 阳泉 045000; 2.西安建筑科技大学 材料科学与工程学院,西安 710055)
摘要:
白榴石熔点高,但在自然界中存在较少,为探究白榴石的生产及应用潜质,以煤矸石、碳酸钾和二氧化硅为原料,采用二步煅烧法制备白榴石,应用XRD、SEM、EDS等表征方法,研究了白榴石的制备工艺参数及其生成机理,并探究了添加白榴石对莫来石-刚玉质材料抗碱侵蚀性能的影响。结果表明:制备白榴石的最佳一步煅烧温度为1 100 ℃,二步煅烧温度为1 575 ℃;白榴石的合成分两步进行,即先生成中间相钾霞石,白榴石再以钾霞石微晶为晶核由液相中析出;试样煅烧过程中产生的富硅熔体黏度大,影响白榴石析晶及生长,使合成纯白榴石的二步煅烧温度较高;添加白榴石可明显提高莫来石-刚玉质材料的抗碱侵蚀性能。研究结果为白榴石的合成及制备抗侵蚀性能优异的莫来石-刚玉质匣钵提供理论依据。
关键词:  白榴石  煤矸石  二步煅烧  生成机理  抗碱侵蚀性能
DOI:10.11951/j.issn.1005-0299.20240198
分类号:TQ175
文献标识码:A
基金项目:矿区生态修复与固废资源化厅市共建山西省重点实验室培育基地开放基金(SXIT202305).
Preparation of leucite and its effect on the corrosion resistance of mullite-corundum materials
GAO Yunqin1,2, BAI Junfeng1,2, WANG Jiale2, MA Gaoru2, YIN Hao2, CAI Jinhua2
(1.The Cultivation Base of Shanxi Key Laboratory of Mining Area Ecological Restoration and Solid Wastes Utilization, Shanxi Institute of Technology, Yangquan 045000, China; 2.College of Materials Science and Engineering, Xi’an University of Architecture and Technology, Xi’an 710055, China)
Abstract:
Leucite has a high melting point, but it is rarely found in nature. In order to explore the production and application potential, leucite was prepared by a two-step calcination method with coal gangue, potassium carbonate, and silica as raw materials. The formation mechanism of leucite were studied using XRD, SEM, and EDS methods. The effect of adding leucite on the alkali corrosion resistance of mullite-corundum materials was also studied. The results indicate that the synthesis of leucite consists of two steps. The intermediate phase kaliophilite is generated firstly, and then leucite crystallizes from the liquid phase via using kaliophilite microcrystals as nuclei. The optimal first-step calcination temperature for preparing leucite is 1 100 ℃, and the second-step calcination temperature is 1 575 ℃. The silicon rich melt formed during the calcination process has a high viscosity and thenaffects the crystallization and growth of leucite, resulting in a higher second-step calcination temperature for synthesizing pure leucite. Adding leucite can significantly improve the alkali corrosion resistance of mullite-corundum materials.The results provide a theoretical basis for the synthesis of leucite and the preparation of mullite-corundum mortar with excellent corrosion resistance.
Key words:  leucite  coal gangue  two-step calcination method  formation mechanism  alkali corrosion resistance

友情链接LINKS