期刊检索

  • 2026年第34卷
  • 2025年第33卷
  • 2024年第32卷
  • 2023年第31卷
  • 2022年第30卷
  • 2021年第29卷
  • 2020年第28卷
  • 2019年第27卷
  • 2018年第26卷
  • 2017年第25卷
  • 2016年第24卷
  • 2015年第23卷
  • 2014年第22卷
  • 2013年第21卷
  • 2012年第20卷
  • 2011年第19卷
  • 2010年第18卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 中国材料研究学会
哈尔滨工业大学
主编 苑世剑 国际刊号ISSN 1005-0299 国内刊号CN 23-1345/TB

期刊网站二维码
微信公众号二维码
引用本文:贡达,宋语嫣,李闯.MnO2结构的温度调控及其用于处理酸性废水的效能[J].材料科学与工艺,2026,34(3):80-89.DOI:10.11951/j.issn.1005-0299.20240175.
GONG Da,SONG Yuyan,LI Chuang.Temperature regulation of the MnO2 structure and its efficacy in the treatment of acidic wastewater[J].Materials Science and Technology,2026,34(3):80-89.DOI:10.11951/j.issn.1005-0299.20240175.
【打印本页】   【HTML】   【下载PDF全文】   【查看/发表评论】  【下载PDF阅读器】  【关闭】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 973次   下载 114次 本文二维码信息
码上扫一扫!
MnO2结构的温度调控及其用于处理酸性废水的效能
贡达1,宋语嫣1,李闯2
(1.沈阳理工大学 艺术设计学院,沈阳 110158;2.沈阳理工大学 材料科学与工程学院,沈阳 110158)
摘要:
水钠锰矿型MnO2具有独特的物理和化学性质,在室内甲醛处理、市政及工业废水治理、土壤改良以及储能等领域具有广泛的应用。本文提出了一种一步水热法制备多孔水钠锰矿纳米球的方法,并研究了其在模拟酸性矿山废水(AMD)中对重金属离子的吸附行为和机理。通过XRD、SEM、N2吸附比表面分析、FTIR、XPS、重金属离子吸附实验等对不同温度下合成的水钠锰矿进行形貌和结构表征以及吸附能力测试。结果表明,随着合成温度的升高,水钠锰矿的结晶度、粒度和氧化度增加,随着溶液pH的升高,水钠锰矿的吸附量增大。在溶液pH值为5时,水钠锰矿对Cu2+、Zn2+、Pb2+和Cd2+的最大吸附量分别为122.6、155.0、619.6、188.0 mg/g,这些重金属离子被水钠锰矿表面的活性氧物种吸附,通过与水钠锰矿层间的K+离子交换吸附。吸附等温线和动力学分析结果表明,样品吸附4种重金属离子遵循朗缪尔一级等温吸附模型,Pb2+、Zn2+和Cd2+的吸附是化学吸附,Cu2+的吸附则是物理吸附。研究结果表明水钠锰矿型MnO2(δMnO2)在处理AMD中重金属离子污染方面具有巨大潜力。
关键词:  酸性矿山废水  水钠锰矿  水热法  吸附  重金属离子
DOI:10.11951/j.issn.1005-0299.20240175
分类号:X524
文献标识码:A
基金项目:
Temperature regulation of the MnO2 structure and its efficacy in the treatment of acidic wastewater
GONG Da1, SONG Yuyan1, LI Chuang2
(1.College of Art & Design, Shenyang Ligong University, Shenyang 110158, China;2.School of Materials Science & Engineering, Shenyang Ligong University, Shenyang 110158,China)
Abstract:
Birnessite-type MnO2 has unique physical and chemical properties, which are widely used in indoor formaldehyde treatment, municipal and industrial wastewater treatment, soil improvement, and energy storage. In this study, a one-step hydrothermal method was proposed to prepare porous birnessite nanosphere, and its adsorption behavior and mechanism of heavy metal ions in simulated acid mine drainage (AMD) were investigated. By XRD, SEM, N2 adsorption-desorption isotherms, FTIR, XPS, and ions adsorption experiment, the structure, morphology, and adsorption performance of heavy metal ions for birnessite synthesized at different temperatures were characterized. The results showed that with the increase of synthesis temperature, the crystallinity, grain size and oxidation degree of birnessite increase, the adsorption capacity of birnessite increased with the increase of solution pH. Under a solution pH value of 5, the maximum adsorption of birnessite for Cu2+, Zn2+, Pb2+, and Cd2+ was 122.6, 155.0, 619.6, 188.0 mg/g, respectively. These heavy metal ions are adsorbed by active oxygen species on the surface of birnessite, and they are also adsorbed by exchange with K+ ions between birnessite layers. The results of adsorption isotherm and kinetics analysis showed that the samples adsorbed the four heavy metal ions following the Langmuir first-order isothermal adsorption model. The adsorption of Pb2+, Zn2+ and Cd2+ was chemical adsorption, and the adsorption of Cu2+ was physical adsorption. The findings prove that the birnessite-type MnO2 (δMnO2) has a great potential in the treatment of heavy metal ions pollution in AMD.
Key words:  acid mine drainage  birnessite  hydrothermal method  adsorption  heavy metal ions

友情链接LINKS