| 引用本文: | 康凌之,单海鹏,陈海悦,陈诗怡,洪闻泽.基于电沉积壳聚糖保护层的高性能锌负极界面设计与性能分析[J].材料科学与工艺,2026,34(3):90-96.DOI:10.11951/j.issn.1005-0299.20240247. |
| KANG Lingzhi,SHAN Haipeng,CHEN Haiyue,CHEN Shiyi,HONG Wenze.Interface design and performance analysis of high-performance zinc anodes based on the electrodeposited chitosan protective layer[J].Materials Science and Technology,2026,34(3):90-96.DOI:10.11951/j.issn.1005-0299.20240247. |
|
| 摘要: |
| 水系锌离子电池具有比容量大、成本低廉、环境友好等优势,有望成为下一代储能系统竞争者。然而,水系锌离子电池在实际应用中仍面临着一系列亟待解决的技术挑战。特别是水、氧诱导的析氢、腐蚀等副反应,以及锌枝晶在电极表面的不可控生长,这些问题不仅降低了电池的库仑效率,而且导致电池快速失效。本文通过简单易控的电沉积工艺在锌负极/电解液界面上引入一种人工生物质保护层,可有效地防止金属锌与电解液的直接接触,显著抑制了副反应的生成。同时,该界面层诱导锌离子在负极表面均匀沉积,有效避免了锌枝晶的生长。结果表明:经过改性后的锌负极展现出了远超纯锌负极的循环稳定性,在5 mA/cm2的电流密度下能够稳定循环超过500 h;组装的全电池在经历600次充放电循环后,仍能保持112.78 mAh/g的超高放电容量,充分证明了这一策略的有效性和实用性。 |
| 关键词: 化学电源 界面 锌负极 副反应 锌枝晶 锌离子电池 |
| DOI:10.11951/j.issn.1005-0299.20240247 |
| 分类号:TQ152 |
| 文献标识码:A |
| 基金项目:浙江省教育厅一般科研项目(Y202351955). |
|
| Interface design and performance analysis of high-performance zinc anodes based on the electrodeposited chitosan protective layer |
|
KANG Lingzhi1, SHAN Haipeng2, CHEN Haiyue1, CHEN Shiyi1, HONG Wenze1
|
|
(1.Ecology Health Institute, Hangzhou Vocational & Technical College, Hangzhou 310018, China; 2.Zhejiang Huayu Sodium-ion Battery New Energy Technology Co., Ltd., Hangzhou 311308, China)
|
| Abstract: |
| Aqueous zinc-ion batteries (AZIBs), characterized by their high specific capacity, economical cost, and eco-friendliness, are promising candidates for next generation of energy storage systems. However, AZIBs still face criticaltechnical challenges that require urgent resolution in practical applications. In particular, the side reactions such as hydrogen evolution and corrosion induced by water and oxygen, as well as the uncontrolled growth of zinc dendrites on the electrode surface, not only degrade Coulombic efficiency but also accelerate battery failure. To address these issues, an artificial biomimetic protective layer was introduced at the zinc anode/electrolyte interface through a simple and controllable electrodeposition process. The interface layer effectively prevents direct contact between metallic zinc and the electrolyte, significantly inhibiting side reactions. Additionally, it induces uniform deposition of zinc ions on the anode surface, effectively preventing the growth of zinc dendrites. The experimental results demonstrate that the modified zinc anode exhibits significantly enhanced cycling stability compared to a pure zinc anode, achieving stable operation for over 500 hours at 5 mA/cm2. The assembled full cell retains an ultrahigh discharge capacity of 112.78 mAh/g after 600 cycles, confirming the efficacy and practicality of this strategy. |
| Key words: chemical power source interface zinc anode side reaction Zn dendrite zinc-ion battery |