期刊检索

  • 2026年第34卷
  • 2025年第33卷
  • 2024年第32卷
  • 2023年第31卷
  • 2022年第30卷
  • 2021年第29卷
  • 2020年第28卷
  • 2019年第27卷
  • 2018年第26卷
  • 2017年第25卷
  • 2016年第24卷
  • 2015年第23卷
  • 2014年第22卷
  • 2013年第21卷
  • 2012年第20卷
  • 2011年第19卷
  • 2010年第18卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 中国材料研究学会
哈尔滨工业大学
主编 苑世剑 国际刊号ISSN 1005-0299 国内刊号CN 23-1345/TB

期刊网站二维码
微信公众号二维码
引用本文:刘鑫喆,周勇,董会,孙良,高阳,张鹏举.CCUS管道止裂CoCrNi中熵合金与Q345钢的电偶腐蚀行为研究[J].材料科学与工艺,2026,34(3):63-71.DOI:10.11951/j.issn.1005-0299.20240196.
LIU Xinzhe,ZHOU Yong,DONG Hui,SUN Liang,GAO Yang,ZHANG Pengju.Study ongalvanic corrosion behavior of CoCrNi medium-entropy alloy and Q345 steelfor CCUS pipeline stopcracking[J].Materials Science and Technology,2026,34(3):63-71.DOI:10.11951/j.issn.1005-0299.20240196.
【打印本页】   【HTML】   【下载PDF全文】   【查看/发表评论】  【下载PDF阅读器】  【关闭】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 941次   下载 79次 本文二维码信息
码上扫一扫!
CCUS管道止裂CoCrNi中熵合金与Q345钢的电偶腐蚀行为研究
刘鑫喆,周勇,董会,孙良,高阳,张鹏举
(西安石油大学 材料科学与工程学院 西安市高性能油气田材料重点实验室,西安 710065)
摘要:
CO2管道断裂是CCUS(碳捕集、利用与封存)技术中的关键安全问题。为评估CoCrNi中熵合金作为CCUS CO2管道高风险段止裂材料的可行性,本研究在室温下对CoCrNi 中熵合金与Q345钢采用3.5 wt.% NaCl溶液进行电化学测试,并进行持续15 d的电偶腐蚀实验。通过每秒采集腐蚀电流和腐蚀电压数据,基于平均腐蚀电流密度评估接触敏感性,并采用失重法计算阳极腐蚀速度和腐蚀系数。同时,通过电化学噪声分析评定材料之间的电偶腐蚀行为。结果表明,CoCrNi中熵合金与Q345钢之间发生明显的电偶腐蚀。Q345钢作为阳极, CoCrNi中熵合金为阴极。Q345钢的腐蚀形式主要是以点蚀为主,腐蚀速度为0.032 87 g/(m2·h),腐蚀系数为26.102。两种金属之间的平均腐蚀电流密度为0.767 μA/cm2,接触敏感等级为B级,表明可以在一定条件下接触使用。为了确保管道在长期使用过程中的安全性和寿命,建议Q345钢在与CoCrNi中熵合金接触使用时,仍需要采取必要的防护措施,以减缓电偶腐蚀效应。
关键词:  电偶腐蚀  CCUS  CoCrNi中熵合金  Q345钢  腐蚀机理
DOI:10.11951/j.issn.1005-0299.20240196
分类号:TG172.2
文献标识码:A
基金项目:西安石油大学研究生创新与实践能力培养计划资助项目(YCS23213139).
Study ongalvanic corrosion behavior of CoCrNi medium-entropy alloy and Q345 steelfor CCUS pipeline stopcracking
LIU Xinzhe, ZHOU Yong, DONG Hui, SUN Liang, GAO Yang, ZHANG Pengju
(Xi’an Key Laboratory of High Performance Oil and Gas Field Materials,School of Materials Science and Engineering, Xi’an Shiyou University,Xi’an 710065,China)
Abstract:
CO2 pipeline rupture is a critical safety issue in Carbon Capture, Utilization, and Storage (CCUS) technology. To assess the feasibility of employing CoCrNi medium-entropy alloy as a crack-arresting material for high-risk segments of CCUS CO2 pipelines, this study conducted electrochemical tests on CoCrNi medium-entropy alloy and Q345 steel in a 3.5 wt.% NaCl solution at room temperature and performed a continuous 15-day galvanic corrosion experiment. Corrosion current and corrosion voltage were collected per second, and contact sensitivity was evaluated based on the average corrosion current density. The anodic corrosion rate and corrosion coefficient were calculated using the weight loss method. Additionally, the galvanic corrosion behavior between the materials was assessed using electrochemical noise analysis. The results demonstrate that significant galvanic corrosion occurs between CoCrNi medium-entropy alloy and Q345 steel, with Q345 steel acting as the anode and CoCrNi medium-entrropy alloy as the cathode. The primary mode of corrosion for Q345 steel is pitting, with a measured corrosion rate of 0.032 87 g/(m2·h) and a corrosion coefficient of 26.102. The average corrosion current density between the two metals is 0.767 μA/cm2, and the contact sensitivity is rated as Grade B, indicating that contact use is permissible under certain conditions. However, to ensure the long-term safety and service life of the pipeline, it is recommended that necessary protective measures be implemented when Q345 steel is in contact with CoCrNi medium-entropy alloy to mitigate the effects of galvanic corrosion.
Key words:  galvanic corrosion  CCUS  CoCrNi medium-entropy alloy  Q345 steel  corrosion mechanism

友情链接LINKS