期刊检索

  • 2026年第58卷
  • 2025年第57卷
  • 2024年第56卷
  • 2023年第55卷
  • 2022年第54卷
  • 2021年第53卷
  • 2020年第52卷
  • 2019年第51卷
  • 2018年第50卷
  • 2017年第49卷
  • 2016年第48卷
  • 2015年第47卷
  • 2014年第46卷
  • 2013年第45卷
  • 2012年第44卷
  • 2011年第43卷
  • 2010年第42卷
  • 第1期
  • 第2期

主管单位 中华人民共和国工业和信息化部 主办单位 哈尔滨工业大学 主编 李隆球 国际刊号ISSN 0367-6234 国内刊号CN 23-1235/T

期刊网站二维码
微信公众号二维码
引用本文:吕刚,李鋆芝,夏金松,张微,张宇,陈艳艳,冯冬冬.新型氨法的燃煤烟气脱碳特性[J].哈尔滨工业大学学报,2026,58(10):162.DOI:10.11918/202505005
Lü Gang,Li Yunzhi,Xia Jinsong,Zhang Wei,Zhang Yu,Chen Yanyan,Feng Dongdong.Decarbonization characteristics of coal combustion flue gas based on a novel ammonia method[J].Journal of Harbin Institute of Technology,2026,58(10):162.DOI:10.11918/202505005
【打印本页】   【HTML】   【下载PDF全文】   【查看/发表评论】  【下载PDF阅读器】  【关闭】
过刊浏览    高级检索
本文已被:浏览 504次   下载 61次 本文二维码信息
码上扫一扫!
分享到: 微信 更多
新型氨法的燃煤烟气脱碳特性
吕刚1,李鋆芝2,夏金松1,张微2,张宇2,陈艳艳1,冯冬冬2
(1.西安航天源动力工程有限公司,西安 710100;2.哈尔滨工业大学 能源科学与工程学院,哈尔滨 150001)
摘要:
氨法捕碳作为最具应用潜力的烟气碳捕集技术,高再生能耗是限制其工业化的瓶颈之一。为此,采用新型氨法捕碳技术,溶析剂乙醇代替吸收剂中的部分水以促进NH4HCO3溶析结晶,晶体再生能够降低CO2再生能耗。烟气CO2体积分数14%、氨浓度4.16 mol/L条件下,通过鼓泡反应研究不同温度和不同乙醇体积分数的CO2吸收特性,探究停留时间对溶析结晶粒径分布的影响规律,并对结晶产物进行理化分析。结果表明:10~15 ℃是新型氨法捕碳技术的较佳反应温度,反应进行到稳定段的CO2脱除率为64.8%,总体积传质系数达3.44×10-4 mol/(m3·s·Pa);随着乙醇体积分数从30%提高到50%,吸收剂的CO2脱除率提升了10.44%,总体积传质系数提升8.86%;乙醇添加有利于烟气氨水乙醇体系中溶析结晶的发生,反应进行60 min出现爆发成核现象,此时吸收剂的CO2担载度高达0.521 7,单位质量NH3的CO2吸收能力为1.35 kg/kg;延长结晶停留时间能够改善晶体的表面形貌和晶体生长,有利于晶体稳定及固液分离,扫描电镜结果表明,晶体生长30 min后仍存在部分缺陷。X射线衍射光谱分析表明,结晶产物的成分主要为碳酸氢铵。
关键词:  二氧化碳捕集  燃煤  氨法  混合结晶  碳酸氢铵
DOI:10.11918/202505005
分类号:TK534.9
基金项目:国家自然科学基金(52376102);国家重点研发计划(2022YFE0204100)
Decarbonization characteristics of coal combustion flue gas based on a novel ammonia method
Lü Gang1,Li Yunzhi2,Xia Jinsong1,Zhang Wei2,Zhang Yu2,Chen Yanyan1,Feng Dongdong2
(1.Xi′an Aerospace Source Power Engineering Company Limited, Xi′an 710100, China; 2.School of Energy Science and Engineering, Harbin Institute of Technology, Harbin 150001, China)
Abstract:
Ammonia-based carbon capture is among the most promising flue-gas CO2 capture technologies, yet high energy consumption for solvent regeneration remains a key barrier to industrial deployment. To address this, a novel ammonia-based process was investigated in which ethanol is used to partially replace water in the solvent to promote the solvo-crystallization of NH4HCO3; crystalline regeneration is expected to reduce the energy required for CO2 recovery. Under the concentration of 14% CO2 and 4.16 mol/L of ammonia, the CO2 absorption characteristics at different temperatures and ethanol concentrations were studied by bubble reactor. The physicochemical structure of crystallization was analyzed and the influence of residence time on the particle distribution was explored. The results show that 10-15 ℃ is the optimal temperature for the new ammonia-based method. The CO2 removal rate is 64.8% and the volumetric mass transfer coefficient reaches 3.44×10-4 mol/(m3·s·Pa) at the stable absorption section. Increasing the ethanol volume fraction from 30% to 50% enhanced the solvent CO2 removal efficiency by 10.44% and increased the overall volumetric mass transfer coefficient by 8.86%. The addition of ethanol is beneficial for the occurrence of crystallization in the flue gas-ammonia-ethanol system. Spontaneous nucleation occurred after 60 minutes of reaction, and a CO2 loading capacity of the absorbent reaches 0.521 7, equivalent to a CO2 absorption capacity of 1.35 kg CO2 per kg NH3; extending the residence time of crystallization can improve the surface morphology and growth of crystals, which is beneficial for crystal stability and solid-liquid separation. Scanning electron microscopy (SEM) results show that defects exist after 30 minutes of crystal growth. The XRD analysis indicates that the main component of the crystallization product is ammonium bicarbonate.
Key words:  carbon capture  coal combustion  ammonia method  mixed crystallization  ammonium bicarbonate

友情链接LINKS