期刊检索

  • 2026年第34卷
  • 2025年第33卷
  • 2024年第32卷
  • 2023年第31卷
  • 2022年第30卷
  • 2021年第29卷
  • 2020年第28卷
  • 2019年第27卷
  • 2018年第26卷
  • 2017年第25卷
  • 2016年第24卷
  • 2015年第23卷
  • 2014年第22卷
  • 2013年第21卷
  • 2012年第20卷
  • 2011年第19卷
  • 2010年第18卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 中国材料研究学会
哈尔滨工业大学
主编 苑世剑 国际刊号ISSN 1005-0299 国内刊号CN 23-1345/TB

期刊网站二维码
微信公众号二维码
引用本文:高尚,黄梦诗,张天宇,马清,孙千.双束电镜中的电子背散射衍射样品抛光技术[J].材料科学与工艺,2026,34(4):27-35.DOI:10.11951/j.issn.1005-0299.20250017.
GAO Shang,HUANG Mengshi,ZHANG Tianyu,MA Qing,SUN Qian.EBSD sample surface polishing technology in FIB-SEM[J].Materials Science and Technology,2026,34(4):27-35.DOI:10.11951/j.issn.1005-0299.20250017.
【打印本页】   【HTML】   【下载PDF全文】   【查看/发表评论】  【下载PDF阅读器】  【关闭】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 710次   下载 94次 本文二维码信息
码上扫一扫!
双束电镜中的电子背散射衍射样品抛光技术
高尚1,2,黄梦诗1,2,张天宇1,马清3,孙千4
(1.哈尔滨工业大学(深圳) 材料科学与工程学院,广东 深圳 518055; 2.广东省半导体光电材料与智能光子系统重点实验室,广东 深圳 518055;3.哈尔滨工业大学(深圳) 实验与创新实践教育中心,广东 深圳 518055; 4.华南理工大学 材料科学与工程学院,广州 510640 )
摘要:
采用双束电镜探索了聚焦离子束(FIB)在电子背散射衍射(EBSD)样品抛光中的应用效果,通过EBSD分析了FIB加工对不同材料表面质量及EBSD表征性能的影响。实验中使用大电流镓离子束对铝、锡、硅及Ni3Sn等材料进行抛光处理,重点研究了扫描步长百分比、离子束能量等工艺参数对材料表面质量的影响规律。结果表明,使用大电流镓离子束,优化扫描步长百分比(5%)后,可短时完成0.5 mm×0.5 mm区域的高效抛光,且表面质量满足EBSD测试要求。对于铝、锡等材料,FIB抛光能有效去除机械抛光产生的变形层,显著提升菊池花样质量;而对于硅等材料,FIB加工会引入表面损伤。同时发现,将离子束能量从30 keV降至5 keV,可显著减少Ni3Sn等材料的表面损伤层厚度和空位缺陷数量,从而改善EBSD表征效果。研究证实,通过合理调控离子束参数,FIB技术可实现高效大面积加工与精细表面质量修复的平衡,为材料微观结构分析提供重要的技术支持。该研究对FIB工艺参数的优化及其在EBSD样品制备中的应用具有重要的指导意义。
关键词:  双束电镜  聚焦离子束(FIB)  电子背散射衍射(EBSD)  样品制备  表面抛光
DOI:10.11951/j.issn.1005-0299.20250017
分类号:TG115.21+5.5,TG115.21+5.3, O722+.7,TN305.2
基金项目:广东省重点实验室项目(2023B1212010003);哈工大研究生教育教学改革研究项目(23MS031);哈工大(深圳)教材建设项目(HITSZJC24009);哈工大(深圳)创新实验项目(INEP1013).
EBSD sample surface polishing technology in FIB-SEM
GAO Shang1,2, HUANG Mengshi1,2, ZHANG Tianyu1, MA Qing3, SUN Qian4
(1.School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518055,China; 2.Guangdong Provincial Key Laboratory of Semiconductor Optoelectronic Materials and Intelligent Photonic Systems, Shenzhen 518055,China; 3.Education Center of Experiments and Innovations, Harbin Institute of Technology (Shenzhen), Shenzhen 518055,China;4.School of Materials Science and Engineering, South China University of Technology, Guangzhou 510640,China)
Abstract:
This study explored the application of focused ion beam (FIB) milling for electron backscatter diffraction (EBSD) sample surface finishing using a FIB-SEM dual-beam microscope platform. The effects of FIB processing on the surface quality and EBSD characterization were investigated for various materials. High-current gallium ion beam milling was used to polish aluminum, tin, silicon, and Ni3Sn. The influence of process parameters, such as beam overlap and ion beam energy, on surface quality was examined. Results show that high-current gallium ion beam milling with an optimized beam overlap (5%) enables rapid polishing of a 0.5 mm×0.5 mm area, achieving a surface quality suitable for EBSD analysis. For aluminum and tin, FIB polishing effectively removed the deformation layer induced by mechanical polishing, significantly improving the quality of EBSD patterns. However, for silicon, FIB milling introduced surface damage. Reducing the ion beam energy from 30 keV to 5 keV significantly decreased the thickness of the damaged layer and the number of vacancies in materials like Ni3Sn, thereby enhancing the quality of EBSD characterization. This study demonstrates that by carefully controlling ion beam parameters, FIB milling can achieve a balance between efficient large-area processing and precise surface quality refinement, providing crucial technical support for microstructural analysis. These findings offer valuable guidance for optimizing FIB process parameters and its application in EBSD sample preparation.
Key words:  FIB-SEM  focused ion beam (FIB)  electron backscatter diffraction (EBSD)  sample preparation  surface polishing

友情链接LINKS