期刊检索

  • 2026年第58卷
  • 2025年第57卷
  • 2024年第56卷
  • 2023年第55卷
  • 2022年第54卷
  • 2021年第53卷
  • 2020年第52卷
  • 2019年第51卷
  • 2018年第50卷
  • 2017年第49卷
  • 2016年第48卷
  • 2015年第47卷
  • 2014年第46卷
  • 2013年第45卷
  • 2012年第44卷
  • 2011年第43卷
  • 2010年第42卷
  • 第1期
  • 第2期

主管单位 中华人民共和国工业和信息化部 主办单位 哈尔滨工业大学 主编 李隆球 国际刊号ISSN 0367-6234 国内刊号CN 23-1235/T

期刊网站二维码
微信公众号二维码
引用本文:王妍,沈朝,张静姿,董锋,张祖洋,高科.造船用冷凝热回收型变频热泵除湿机热湿特性[J].哈尔滨工业大学学报,2026,58(10):181.DOI:10.11918/202503017
Wang Yan,Shen Chao,Zhang Jingzi,Dong Feng,Zhang Zuyang,Gao Ke.Thermo-hygrometric characteristics of variable-frequency heat pump dehumidification unit with condensater heat recovery for shipbuilding[J].Journal of Harbin Institute of Technology,2026,58(10):181.DOI:10.11918/202503017
【打印本页】   【HTML】   【下载PDF全文】   【查看/发表评论】  【下载PDF阅读器】  【关闭】
过刊浏览    高级检索
本文已被:浏览 146次   下载 48次 本文二维码信息
码上扫一扫!
分享到: 微信 更多
造船用冷凝热回收型变频热泵除湿机热湿特性
王妍1,2,沈朝1,2,张静姿3,董锋3,张祖洋3,高科3
(1.哈尔滨工业大学 建筑与设计学院,哈尔滨 150006;2.寒地城乡人居环境科学与技术工业和信息化部重点实验室 (哈尔滨工业大学),哈尔滨 150090;3.汉福启东环境科技股份有限公司,江苏 启东 226236)
摘要:
为解决造船业高温高湿环境下除湿效率低、能耗高及送风参数控制不精确等问题,研发一种冷凝热回收型变频热泵除湿机组,并对其性能开展系统性实验研究。该机组采用双冷凝器并联结构与全变频控制策略,具备多参数调控能力。基于焓差实验室搭建测试平台来模拟温度为35 ℃、相对湿度为70%的典型造船工况,系统分析压缩机转速、双冷凝器换热量的分配、冷凝风机频率及送风风速对机组除湿性能的影响,并采用机组能效比(COP)和单位能耗除湿量(SMER)共同作为评价指标。结果表明:在压缩机转速为3 500 r/min、冷凝风机频率为30 Hz、两器换热量配比为5.17∶1、送风风速为2.7 m/s时,COP可达4.36,SMER为4.01 kg/kWh。该机组在多种工况下均可实现对送风温湿度的精准调控,并具有良好的节能效果。本研究成果为船舶制造等对湿度控制要求严格的工业场景提供了高效节能的技术路径,并为工业除湿系统的设计与运行优化提供了理论和实验依据。
关键词:  热泵除湿机组  造船工业  温湿度控制  能效比  参数优化
DOI:10.11918/202503017
分类号:TU834.9
基金项目:
Thermo-hygrometric characteristics of variable-frequency heat pump dehumidification unit with condensater heat recovery for shipbuilding
Wang Yan1,2,Shen Chao1,2,Zhang Jingzi3,Dong Feng3,Zhang Zuyang3,Gao Ke3
(1.School of Architecture and Design, Harbin Institute of Technology, Harbin 150006, China;2.Key Laboratory of Cold Region Urban and Rural Human Settlement Environment Science and Technology(Harbin Institute of Technology), Ministry of Industry and Information Technology, Harbin 150090, China; 3.Hanfu Qidong Environmental Technology Co., Ltd., Qidong 226236, Jiangsu,China)
Abstract:
The shipbuilding industry faces challenges with low dehumidification efficiency, high energy consumption, and imprecise air supply control under high-temperature and high-humidity conditions. To address these challenges, this study developed a condensater heat recovery variable-frequency heat pump dehumidification unit and systematically evaluated its performance. The unit applied a dual-condenser parallel structure and a full-variable frequency control strategy, enabling the regulation of multi-parameters. A testing platform based on enthalpy difference laboratory was established to simulate a typical shipbuilding environment, i.e., at 35 ℃ and 70% relative humidity. The effects of compressor speed, heat exchange distribution between the two condensers, condenser fan frequency, and air supply velocity on the dehumidification performance were comprehensively examined. The performance was quantitatively assessed by coefficient of performance (COP) and specific moisture extraction rate (SMER). The results showed that optimal performance with COP of 4.36 and SMER of 4.01 kg/kWh was achieved at a compressor speed of 3 500 r/min, a condenser fan frequency of 30 Hz, a condenser heat exchange ratio of 5.17∶1, and an air supply velocity of 2.7 m/s. The unit demonstrated precise control of temperature and humidity under various operational conditions and exhibited excellent energy efficiency. The findings will provide an effective and energy-saving technical solution for industrial applications requiring strict humidity control, such as shipbuilding, and offer both theoretical and experimental support for the design and optimization of industrial dehumidification systems.
Key words:  heat pump dehumidification unit  shipbuilding industry  temperature and humidity control  coefficient of performance  parameter optimization

友情链接LINKS