期刊检索

  • 2026年第58卷
  • 2025年第57卷
  • 2024年第56卷
  • 2023年第55卷
  • 2022年第54卷
  • 2021年第53卷
  • 2020年第52卷
  • 2019年第51卷
  • 2018年第50卷
  • 2017年第49卷
  • 2016年第48卷
  • 2015年第47卷
  • 2014年第46卷
  • 2013年第45卷
  • 2012年第44卷
  • 2011年第43卷
  • 2010年第42卷
  • 第1期
  • 第2期

主管单位 中华人民共和国工业和信息化部 主办单位 哈尔滨工业大学 主编 李隆球 国际刊号ISSN 0367-6234 国内刊号CN 23-1235/T

期刊网站二维码
微信公众号二维码
引用本文:王万祯.Q690D高强钢的低周疲劳模型[J].哈尔滨工业大学学报,2026,58(10):108.DOI:10.11918/202504074
Wang Wanzhen.A low-cycle fatigue model of Q690D high-strength steel[J].Journal of Harbin Institute of Technology,2026,58(10):108.DOI:10.11918/202504074
【打印本页】   【HTML】   【下载PDF全文】   【查看/发表评论】  【下载PDF阅读器】  【关闭】
过刊浏览    高级检索
本文已被:浏览 137次   下载 45次 本文二维码信息
码上扫一扫!
分享到: 微信 更多
Q690D高强钢的低周疲劳模型
王万祯
(宁波大学 土木工程与未来城市学院,浙江 宁波 315211)
摘要:
为计算高强钢在高应变幅作用下(如强震)的低周疲劳寿命,将高强钢低周疲劳裂纹萌生与稳定扩展面积的增速描述为循环加载次数的递增幂函数。通过积分低周疲劳裂纹萌生与稳定扩展面积增速方程,推导出统一计算疲劳裂纹萌生与稳定扩展寿命的高强钢的低周疲劳模型。将椭球面断裂模型作为高强钢低周疲劳裂纹失稳扩展判据和裂尖开裂判据,对Q690D高强钢圆杆在不同高应变幅下(±0.5%,±1.5%,±2.0%,±2.5%,±3.0%)的低周疲劳裂纹扩展进行了理论计算和数值模拟,得到Q690D高强钢圆杆在不同高应变幅下的低周疲劳裂纹萌生与稳定扩展面积。建立满足应力边界条件的高强钢低周寿命模型参数和疲劳断裂面上最大疲劳载荷作用下的名义最大正应力及疲劳载荷幅作用下的正应力幅的函数。根据Q690D高强钢圆杆的低周疲劳试验寿命和数值计算的低周疲劳裂纹萌生与稳定扩展面积,标定Q690D高强钢圆杆在不同高应变幅下的低周疲劳寿命计算式。计算结果表明,标定的Q690D高强钢圆杆的低周疲劳寿命计算式的计算误差为-26.1%~-2.7%。
关键词:  低周疲劳模型  Q690D高强钢  应变幅  疲劳寿命  椭球面断裂模型
DOI:10.11918/202504074
分类号:TU391
基金项目:宁波市公益性科技计划(2023S101);浙江省自然科学基金(LY24E080001)
A low-cycle fatigue model of Q690D high-strength steel
Wang Wanzhen
(School of Civil Engineering and Future Cities, Ningbo University, Ningbo 315211, Zhejiang, China)
Abstract:
In order to calculate the low-cycle fatigue life of high-strength steel under high strain amplitudes (such as strong earthquakes), this paper described the rate of the initiation and stable propagation area of a low-cycle fatigue crack in high-strength steel as an increasing power function of the number of cyclic loading cycles. By integrating the accelerated growth equations of the crack initiation area and the stable propagation area under low-cycle fatigue, a low-cycle fatigue model for high-strength steel was derived to uniformly calculate the fatigue crack initiation and stable propagation life. By using an ellipsoidal fracture model as a criterion for unstable propagation of the low-cycle fatigue crack and crack tip cracking in high-strength steel, the propagation of the low-cycle fatigue crack in a round rod made of Q690D high-strength steel under different high strain amplitudes (±0.5%, ±1.5%, ±2.0%, ±2.5%, and ±3.0%) was calculated theoretically and simulated numerically. As a consequence, the initiation and stable propagation areas of the low-cycle fatigue crack in the round rod made of Q690D high-strength steel under different high strain amplitudes were calculated. The paper established a function that satisfies the stress boundary conditions, linking the low-cycle life model parameters of high-strength steel to the nominal maximum normal stress under the maximum fatigue load and the normal stress amplitude under the fatigue load amplitude on the fatigue fracture surface. Based on the low-cycle fatigue test life of the round rod made of Q690D high-strength steel and the numerically calculated crack initiation and stable propagation area under low-cycle fatigue, the low-cycle fatigue life calculation formula for the round rod made of Q690D high-strength steel under different high strain amplitudes was calibrated. The calculation results show that the calculation error of the calibrated low-cycle fatigue life calculation formula for the round rod made of Q690D high-strength steel ranges from -26.1% to -2.7%.
Key words:  low-cycle fatigue model  Q690D high-strength steel  strain amplitude  fatigue life  ellipsoidal fracture model

友情链接LINKS