期刊检索

  • 2026年第58卷
  • 2025年第57卷
  • 2024年第56卷
  • 2023年第55卷
  • 2022年第54卷
  • 2021年第53卷
  • 2020年第52卷
  • 2019年第51卷
  • 2018年第50卷
  • 2017年第49卷
  • 2016年第48卷
  • 2015年第47卷
  • 2014年第46卷
  • 2013年第45卷
  • 2012年第44卷
  • 2011年第43卷
  • 2010年第42卷
  • 第1期
  • 第2期

主管单位 中华人民共和国工业和信息化部 主办单位 哈尔滨工业大学 主编 李隆球 国际刊号ISSN 0367-6234 国内刊号CN 23-1235/T

期刊网站二维码
微信公众号二维码
引用本文:张昊宇,张亮泉,张云波,刘梦鸽.基于单元材料积分损伤模型的钢筋混凝土框架结构损伤[J].哈尔滨工业大学学报,2026,58(10):61.DOI:10.11918/202502013
Zhang Haoyu,Zhang Liangquan,Zhang Yunbo,Liu Mengge.Damage of reinforced concrete frame structures using integral damage model of element material[J].Journal of Harbin Institute of Technology,2026,58(10):61.DOI:10.11918/202502013
【打印本页】   【HTML】   【下载PDF全文】   【查看/发表评论】  【下载PDF阅读器】  【关闭】
过刊浏览    高级检索
本文已被:浏览 706次   下载 74次 本文二维码信息
码上扫一扫!
分享到: 微信 更多
基于单元材料积分损伤模型的钢筋混凝土框架结构损伤
张昊宇1,张亮泉2,张云波2,刘梦鸽2
(1.中国地震局地震工程与工程振动重点实验室(中国地震局工程力学研究所),哈尔滨 150080; 2.东北林业大学 土木与交通学院,哈尔滨 150040)
摘要:
针对传统损伤指标在评估三维地震动加载下钢筋混凝土(RC)框架结构损伤程度时精度不高的问题,介绍一种基于单元材料积分的RC框架结构楼层地震损伤评估模型——Diem(damage indices of integration of element material)。该模型基于已有的混凝土及钢筋的材料损伤指标,采用考虑距形心轴距离的加权平均法,构造具有方向属性的塑性铰截面损伤指标。在此基础上,进一步构建基于损伤加权的单根RC框架柱损伤模型,以及结合损伤和轴力混合加权的楼层损伤模型。以一栋实际震损的RC框架结构为分析对象,采用OpenSEES软件进行了非线性IDA分析,并基于OpenSEES输出的柱曲率及轴力数据,使用自编程序对单柱及薄弱层进行基于Diem模型的损伤分析。结果表明:Diem模型计算的框架单柱及楼层损伤程度与实际震损相符;利用Diem方向性计算得到的“损伤环”与实际震害的残余侧移方向一致,能有效表征结构不同方向上的损伤演化特征。Diem损伤模型适用于实际三维地震动下的RC结构精细损伤评估。
关键词:  钢筋混凝土框架  损伤指标  塑性铰  三维地震动  轴力波动
DOI:10.11918/202502013
分类号:TU375.4
基金项目:中国地震局工程力学研究所基本科研业务费(2019B12);国家自然科学基金(3,2AC080003);黑龙江省自然科学基金(LH2024E015);云南省科技厅重大科技专项计划(202402AC080003)
Damage of reinforced concrete frame structures using integral damage model of element material
Zhang Haoyu1,Zhang Liangquan2,Zhang Yunbo2,Liu Mengge2
(1.Key Laboratory of Earthquake Engineering and Engineering Vibration, China Earthquake Administration (Institute of Engineering Mechanics, China Earthquake Administration), Harbin 150080, China; 2.School of Civil Engineering and Transportation, Northeast Forestry University, Harbin 150040, China)
Abstract:
Aiming at the problem of low accuracy of traditional damage indices when evaluating the damage degree of reinforced concrete (RC) frame structures under three-dimensional (3D) ground motion loading, this paper presented a storey seismic damage assessment model for RC frame structures based on the integral of element material, namely damage indices of integration of element material (Diem). Based on the existing material damage indices of concrete and steel bar, this model adopted the weighted average method considering the distance from the centroidal axis to construct the plastic hinge section damage index with directional properties. On this basis, it further constructed a damage model for a single RC frame column based on damage weighting and a storey damage model combining mixed weighting of damage and axial force. Taking an actually seismically damaged RC frame structure as the analysis object, this paper performed nonlinear incremental dynamic analysis (IDA) using OpenSEES software and utilized the self-compiled program to conduct Diem-based damage analysis for single columns and weak storeys based on the column curvature and axial force data output by OpenSEES. The results show that the damage degrees of single frame columns and storeys calculated by the Diem model are consistent with actual seismic damage. The "damage ring" obtained through calculation using the directional property of Diem is consistent with the residual drift direction of actual seismic damage and can effectively characterize the structural damage evolution characteristics in different directions. The Diem damage model is suitable for refined damage assessment of RC structures under actual 3D ground motion.
Key words:  reinforced concrete frame  damage index  plastic hinge  3D ground motion  axial force fluctuation

友情链接LINKS