| 引用本文: | 郑浩锐,杨宇峰,潘颖达,刘家瑞,郁发新.宽带多波束形成中可变分数延时滤波器设计[J].哈尔滨工业大学学报,2026,58(9):1.DOI:10.11918/202412039 |
| Zheng Haorui,Yang Yufeng,Pan Yingda,Liu Jiarui,Yu Faxin.Design of variable fractional delay filter in broadband multi-beam forming[J].Journal of Harbin Institute of Technology,2026,58(9):1.DOI:10.11918/202412039 |
|
| 摘要: |
| 为降低截取方法对可变分数延时滤波器系数定点量化时带来的性能损失,优化分数延时滤波器工程应用的资源消耗,提出一种结合极小化极大(Minimax)方法和混合整数线性规划(mixed integer linear programming,MILP)的Farrow滤波器设计方法,并引入Farrow滤波器复用方式。首先,根据Farrow滤波器结构及系数对称性,将滤波器系数求解表征为具有幅频响应峰值误差约束和分数延时误差约束的优化问题,并对Farrow滤波器系数建立整数约束;其次,根据所建立的约束,对滤波器系数进行求解;再次,基于引入的Farrow滤波器复用方式,对资源消耗进行分析;最后,在Xilinx VCU118开发板上搭建16通道4波束的波束形成系统实验平台,对本文提出的滤波器设计方法及复用方式进行验证。实验结果表明:在相同量化位宽条件下,相比于传统截取量化方法,本文所提方法降低了分数延时滤波器的归一化均方误差和群延时误差;Farrow滤波器组在复用后,资源消耗得到显著优化;实验平台形成的数字波束指向符合期望,无指向偏移现象。本文提出的设计方法与复用方式可为Farrow滤波器在宽带多波束形成中的工程应用提供参考。 |
| 关键词: 可变分数延时滤波器 Farrow结构 混合整数线性规划 极小化极大方法 模块复用 |
| DOI:10.11918/202412039 |
| 分类号:TN911 |
| 文献标识码:A |
| 基金项目:浙江省科技计划项目(2025C01076) |
|
| Design of variable fractional delay filter in broadband multi-beam forming |
|
Zheng Haorui,Yang Yufeng,Pan Yingda,Liu Jiarui,Yu Faxin
|
|
(School of Aeronautics and Astronautics, Zhejiang University, Hangzhou 310027, China)
|
| Abstract: |
| To reduce the performance loss caused by fixed-point quantization of variable fractional delay filter coefficients using truncation methods and optimize the resource consumption of fractional delay filter engineering applications, this paper proposes a Farrow filter design method that combines the Minimax method and mixed integer linear programming(MILP). And, the multiplexing method of Farrow filters is introduced. Firstly, based on the Farrow filter structure and coefficient symmetry, the filter coefficient solution is characterized as an optimization problem with amplitude-frequency response peak error constraints and fractional delay error constraints and integer constraints are established on the Farrow filter coefficients. Secondly, based on the established constraints, the filter coefficients are solved. Then, resource consumption is analyzed based on the introduced Farrow filter reuse method. Finally, a 16-channel, 4-beam beamforming system experimental platform is built on the Xilinx VCU118 development board to validate the filter design method and multiplexing method proposed in this paper. The experimental results show that, under the same quantization bit width conditions, compared with traditional truncation quantization methods, the proposed method reduces the normalized root-mean-squared and group delay error of fractional delay filters. The Farrow filter bank has significantly optimized resource consumption after reuse. The digital beam pattern formed by the experimental platform meets expectations without any directional deviation. The design method and multiplexing method proposed in this paper can provide reference for the engineering application of Farrow filter in broadband multi-beamforming system. |
| Key words: variable fractional delay filter Farrow structure mixed integer linear programming Minimax method module reuse |