期刊检索

  • 2026年第58卷
  • 2025年第57卷
  • 2024年第56卷
  • 2023年第55卷
  • 2022年第54卷
  • 2021年第53卷
  • 2020年第52卷
  • 2019年第51卷
  • 2018年第50卷
  • 2017年第49卷
  • 2016年第48卷
  • 2015年第47卷
  • 2014年第46卷
  • 2013年第45卷
  • 2012年第44卷
  • 2011年第43卷
  • 2010年第42卷
  • 第1期
  • 第2期

主管单位 中华人民共和国工业和信息化部 主办单位 哈尔滨工业大学 主编 李隆球 国际刊号ISSN 0367-6234 国内刊号CN 23-1235/T

期刊网站二维码
微信公众号二维码
引用本文:张荣政,陶政,王勇,张君秋.基于多基雷达的进动锥体目标角速度矢量估计[J].哈尔滨工业大学学报,2026,58(8):79.DOI:10.11918/202601037
Zhang Rongzheng,Tao Zheng,Wang Yong,Zhang Junqiu.Estimation of angular velocity vector for precessing conical targets based on multi-static radar[J].Journal of Harbin Institute of Technology,2026,58(8):79.DOI:10.11918/202601037
【打印本页】   【HTML】   【下载PDF全文】   【查看/发表评论】  【下载PDF阅读器】  【关闭】
过刊浏览    高级检索
本文已被:浏览 1013次   下载 90次 本文二维码信息
码上扫一扫!
分享到: 微信 更多
基于多基雷达的进动锥体目标角速度矢量估计
张荣政,陶政,王勇,张君秋
(哈尔滨工业大学 电子与信息工程学院,哈尔滨 150001)
摘要:
弹道导弹飞行中段是预警探测与识别拦截的重要阶段。弹头等重型锥体目标在释放后,由于不可避免的横向力矩干扰,通常会呈现出自旋与锥旋合成的复杂进动运动。针对单、双基雷达条件下角速度矢量存在不可完全观测性,且现有参数估计算法严重依赖观测几何并对环境噪声敏感等问题,本文提出了一种基于多基雷达微动曲线的进动目标角速度矢量估计方法。首先,通过构建进动锥体运动与多基雷达观测模型,提取出多部雷达高分辨距离像序列中散射点的微动曲线。其次,深入挖掘散射点微动规律,建立了散射点径向位移与锥旋角速度之间的几何约束关系,利用多视角下的线性约束条件实现对锥旋角速度矢量的精确求解。最终,结合微动曲线呈现的进动周期特性,推导计算出角速度的大小与矢量。数值仿真与重构实验表明,该方法在较低的信噪比条件下,对比传统方法能够实现对角速度矢量的稳定估计,具备更出色的抗噪鲁棒性,且利用估计参数重构的微动曲线有效验证了结果的物理一致性 。
关键词:  锥体目标  多基雷达  微多普勒效应  锥旋运动  自旋运动  角速度估计
DOI:10.11918/202601037
分类号:TN975
基金项目:国家杰出青年科学基金(62325104)
Estimation of angular velocity vector for precessing conical targets based on multi-static radar
Zhang Rongzheng,Tao Zheng,Wang Yong,Zhang Junqiu
(School of Electronics and Information Engineering, Harbin Institute of Technology, Harbin 150001, China)
Abstract:
The midcourse phase of ballistic missile flight is an important stage for early warning, detection, recognition, and interception. After deployment, heavy conical targets such as warheads typically exhibit complex precession motion, a combination of spin and coning, due to unavoidable lateral torque interference. To address the problems that the angular velocity vector is incompletely observable under monostatic and bistatic radar conditions and that existing parameter estimation algorithms heavily rely on observation geometry and are sensitive to environmental noise, this paper proposed an estimation method for the angular velocity vector of precessing targets based on multi-static radar micro-motion curves. First, by constructing a precessing cone motion model and a multi-static radar observation model, this paper extracted the micro-motion curves of scattering points from the high-resolution range profile sequences of multiple radars. Second, by deeply mining the micro-motion laws of scattering points, this paper established a geometric constraint relationship between the radial displacement of scattering points and the coning angular velocity and realized the precise calculation of the coning angular velocity vector using linear constraints from multiple viewing angles. Finally, combined with the precession period characteristics exhibited by the micro-motion curves, the magnitude and vector of the angular velocity were derived and calculated. Numerical simulations and reconstruction experiments demonstrate that, compared with traditional methods, the proposed method can achieve stable estimation of the angular velocity vector under low signal-to-noise ratio conditions, exhibiting superior anti-noise robustness. Furthermore, the micro-motion curves reconstructed using the estimated parameters effectively verify the physical consistency of the results.
Key words:  conical target  multi-static radar  micro-Doppler effect  coning motion  spin motion  angular velocity estimation

友情链接LINKS