| 引用本文: | 何志超,尤涛,苑成策,李迎春,刘丽,黄玉东.碳纤维水性上浆剂研究进展[J].哈尔滨工业大学学报,2026,58(8):1.DOI:10.11918/202512118 |
| He Zhichao,You Tao,Yuan Chengce,Li Yingchun,Liu Li,Huang Yudong.Research progress on aqueous sizing agents for carbon fibers[J].Journal of Harbin Institute of Technology,2026,58(8):1.DOI:10.11918/202512118 |
|
| |
|
|
| 本文已被:浏览 2267次 下载 198次 |
 码上扫一扫! |
|
|
| 碳纤维水性上浆剂研究进展 |
|
何志超1,2,尤涛3,苑成策4,李迎春1,2,刘丽3,黄玉东3
|
|
(1.中北大学 材料科学与工程学院,太原 030051; 2.山西省聚酰胺材料技术创新中心(中北大学),太原 030051;3.哈尔滨工业大学 化工与化学学院,哈尔滨 150001; 4.沈阳飞机工业(集团)有限公司,沈阳 110850)
|
|
| 摘要: |
| 碳纤维增强树脂基复合材料在航空航天、船舶制造等关键领域的应用日益广泛,而作为其关键界面的上浆剂,对保护纤维、集束单丝及优化纤维与树脂基体间的界面性能至关重要。尽管国产碳纤维产业已取得长足进步,但高性能碳纤维上浆剂的核心技术仍落后于国外企业,成为制约产业链自主可控的“卡脖子”难题。本文概括了碳纤维上浆剂提升复合材料界面性能的两种核心机理,为上浆剂的设计制备提供理论基础;总结了溶剂型、乳液型和水性上浆剂的各自特点,对比了不同种类上浆剂组成、制备方法、界面性能、环保以及成本等方面的区别,认为绿色环保、成本低廉的水性上浆剂是未来的发展方向,并对其目前的研究现状进行了详细综述;指出目前碳纤维水性上浆剂面临的挑战,既有普遍存在的稳定性问题,也缺乏适用于高性能热塑性树脂体系的专用高端产品;最后对碳纤维水性上浆剂未来研究方向进行了展望,旨在为中国高性能碳纤维上浆剂的自主研发提供理论参考与技术思路。 |
| 关键词: 碳纤维增强树脂基复合材料 碳纤维水性上浆剂 高性能热塑性树脂 界面性能 |
| DOI:10.11918/202512118 |
| 分类号:TB332 |
| 基金项目:国家自然科学基金青年基金C类(52503117) |
|
| Research progress on aqueous sizing agents for carbon fibers |
|
He Zhichao1,2,You Tao3,Yuan Chengce4,Li Yingchun1,2,Liu Li3,Huang Yudong3
|
|
(1.School of Materials Science and Engineering, North University of China, Taiyuan 030051, China; 2.Shanxi Center of Technology Innovation for Polyamide Materials (North University of China), Taiyuan 030051, China; 3.School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin 150001, China; 4.Shenyang Aircraft Corporation, Shenyang 110850, China)
|
| Abstract: |
| Carbon fiber reinforced polymer composites are increasingly utilized in critical fields such as aerospace and ship building. As a key interface material, the sizing agent is crucial for protecting fibers, bundling filaments, and optimizing the interfacial performance between fibers and resin matrices. Although the Chinese carbon fiber industry has made significant progress, core technologies for high-performance sizing agents still lag behind international counterparts, becoming a “bottleneck” problem restricting the independent control of the industrial chain. This paper summarized two core mechanisms by which sizing agents for carbon fibers enhance the interfacial performance of composites, providing a theoretical basis for the design and preparation of sizing agents. The characteristics of solvent-based, emulsion-type, and aqueous sizing agents were summarized. The differences in composition, preparation methods, interfacial performance, environmental protection, and cost among different sizing agents were compared. It is considered that eco-friendly and low-cost aqueous sizing agents represent the future direction, and their current research status is reviewed in detail. Meanwhile, the challenges currently faced by aqueous sizing agents for carbon fibers are pointed out, including the prevalent stability issues and the lack of specialized high-end products suitable for high-performance thermoplastic resin systems. Finally, the future research directions are prospected, aiming to provide theoretical references and technical ideas for the independent research and development of high-performance sizing agents for carbon fibers in China. |
| Key words: carbon fiber reinforced polymer composite aqueous sizing agent for carbon fiber high-performance thermoplastic resin interfacial performance |
|
|
|
|