期刊检索

  • 2026年第34卷
  • 2025年第33卷
  • 2024年第32卷
  • 2023年第31卷
  • 2022年第30卷
  • 2021年第29卷
  • 2020年第28卷
  • 2019年第27卷
  • 2018年第26卷
  • 2017年第25卷
  • 2016年第24卷
  • 2015年第23卷
  • 2014年第22卷
  • 2013年第21卷
  • 2012年第20卷
  • 2011年第19卷
  • 2010年第18卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 中国材料研究学会
哈尔滨工业大学
主编 苑世剑 国际刊号ISSN 1005-0299 国内刊号CN 23-1345/TB

期刊网站二维码
微信公众号二维码
引用本文:李云博,张洋,李日.基于修正CALBM模型的Fe0.34C铸锭宏观偏析数值模拟研究[J].材料科学与工艺,2026,34(5):58-65, 73.DOI:10.11951/j.issn.1005-0299.20250059.
LI Yunbo,ZHANG Yang,LI Ri.Numerical simulation of macrosegregation in Fe0.34C ingot based on modified CALBM model[J].Materials Science and Technology,2026,34(5):58-65, 73.DOI:10.11951/j.issn.1005-0299.20250059.
【打印本页】   【HTML】   【下载PDF全文】   【查看/发表评论】  【下载PDF阅读器】  【关闭】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 329次   下载 21次 本文二维码信息
码上扫一扫!
基于修正CALBM模型的Fe0.34C铸锭宏观偏析数值模拟研究
李云博, 张洋, 李日
(河北工业大学 材料科学与工程学院, 天津 300401 )
摘要:
碳钢铸锭凝固过程中产生的宏观偏析会导致铸锭力学性能分布不均,且难以通过热处理消除,因此准确预测宏观偏析的分布及其形成机理对优化生产工艺具有重要意义。本文通过对格子玻尔兹曼方法(Lattice Boltzmann Method, LBM)的迁移部分进行修正,构建了严格满足质量、动量和热量守恒的元胞自动机(Cellular Automata, CA)-LBM耦合模型,该模型充分考虑了微观组织的演化行为。通过多物理场作用下单枝晶生长的数值验证,证实了模型具有良好的计算精度和稳定性。基于该模型,对Fe0.34C钢铸锭的凝固过程进行了数值模拟,成功预测了顶部正偏析、底部负偏析、A型偏析和V型偏析的分布特征。进一步通过不同散热速率(200、400和800 W/(m2·K))下的凝固过程模拟发现,随着散热速率的增加,宏观偏析的分布范围和偏析程度显著增强,且在800 W/(m2·K)的散热速率下首次计算出顶部负偏析现象。研究结果表明,上述宏观偏析的形成主要源于溶质热自然对流与固液界面推进的相互作用。
关键词:  宏观偏析  元胞自动机  格子玻尔兹曼方法  铸锭凝固  数值模拟
DOI:10.11951/j.issn.1005-0299.20250059
分类号:TG111.4
文献标识码:A
基金项目:国家自然科学基金资助项目(51975182).
Numerical simulation of macrosegregation in Fe0.34C ingot based on modified CALBM model
LI Yunbo,ZHANG Yang,LI Ri
(School of Materials Science and Engineering, Hebei University of Technology, Tianjin 300401, China)
Abstract:
Macrosegregation formed during the solidification of carbon steel ingots leads to non-uniform mechanical properties and is difficult to eliminate through heat treatment. Therefore, accurately predicting the distribution and formation mechanisms of macrosegregation is of great significance for optimizing production processes. To address this issue, a Cellular Automata (CA)-Lattice Boltzmann Method (LBM) coupled model was developed by modifying the migration component of the LBM, ensuring strict conservation of mass, momentum, and heat. This model fully considers the evolution behavior of microstructures. Computational validation of single dendrite growth under multi-physics fields confirmed that the model exhibits excellent computational accuracy and stability. Based on this model, the solidification process of Fe0.34C steel ingots was numerically simulated, successfully predicting the distribution characteristics of hot-top segregation, negative base segregation, A-segregation, and V-segregation. Further simulations of the solidification process under different cooling rates (200, 400, and 800 W/(m2·K)) revealed that as the cooling rate increases, the distribution range and degree of macrosegregation significantly intensify. Notably, negative segregation at the top was first calculated under a cooling rate of 800 W/(m2·K). The results indicate that the formation of these macrosegregations is primarily attributed to the interaction between solute-thermal natural convection and the advancement of the solid-liquid interface.
Key words:  macrosegregation  cellular automata  lattice Boltzmann method  ingot solidification  numerical simulation

友情链接LINKS