| 引用本文: | 杜超,赵浩成.柔性封装材料PUEE的制备及其与Al的三层阳极键合[J].材料科学与工艺,2026,34(4):77-84.DOI:10.11951/j.issn.1005-0299.20250127. |
| DU Chao,ZHAO Haocheng.Preparation of flexible encapsulation material PUEE and its three-layer anodic bonding with Al[J].Materials Science and Technology,2026,34(4):77-84.DOI:10.11951/j.issn.1005-0299.20250127. |
|
| 摘要: |
| 聚氨酯弹性体(PUEE)是一种具有广泛应用前景的功能材料,本文采用预聚法设计并制备了PUEE材料,同时引入不同比例的双三氟甲磺酰亚胺锂(LiTFSI),得到能够进行阳极键合的柔性封装材料,并研究其阳极键合性能。通过红外光谱、X射线衍射、热分析、扫描电镜等手段,重点分析了不同锂盐含量对基体的影响,发现所制备的PUEE与LiTFSI络合良好,且随着锂盐含量的增加基体内部逐步呈现无序化,材料在室温下的离子导电率最高可达8.2×10-7 S/cm;通过DSC和TGA分析表明所制备PUEE具有良好热稳定性;在阳极键合实验中,成功实现了PUEE/Al/PUEE的三层阳极键合,键合界面表现出明显的元素梯度分布,表明离子迁移到键合界面并发生反应,生成键合层。研究结果拓展了PUEE作为柔性封装材料在键合封装领域的应用。 |
| 关键词: 三层阳极键合 PUEE 封装 键合界面 键合性能 |
| DOI:10.11951/j.issn.1005-0299.20250127 |
| 分类号:TG496 |
| 基金项目:山西省基础研究计划(202303021222260);轻质材料改性应用山西省科技创新青年人才团队项目(202204051001005);晋中学院“青年英才”支持计划科研项目(jzxyqnyc202403). |
|
| Preparation of flexible encapsulation material PUEE and its three-layer anodic bonding with Al |
|
DU Chao1, ZHAO Haocheng2
|
|
(1.Department of Materials Science and Engineering, JINGZHONG University, Jingzhong 030600, China;2.Faculty of Energy Chemistry and Materials Engineering, Shanxi Institute ofEnergy, Jinzhong 030600, China)
|
| Abstract: |
| Polyurethane elastomer (PUEE) is a functional material with broad application prospects. This study employed the prepolymer method to design and prepare the PUEE, while introducing varying proportions of lithium bis(trifluoromethanesulfonyl) imide (LiTFSl), ultimately obtaining a flexible encapsulation material capable. We studied the anodic bonding performance of PUEE. The effects of different lithium salt contents on the matrix were analyzed by means of infrared spectroscopy, X-ray diffraction, thermal analysis, scanning electron microscopy, etc. Finally, it was found that the prepared PUEE was well complexed with LiTFSl, and the matrix gradually showed disorder with the increase of lithium salt content. The ionic conductivity of the material at room temperature could reach up to 8.2×10-7 S/cm at the highest. The DSC and TGA analyses indicated that the prepared PUEE had good thermal stability. In the anodic bonding experiment, the three-layer anodic bonding of PUEE/Al/PUEE was successfully achieved. The bonding interface showed a distinct elemental gradient distribution, indicating that ions migrate to the bonding interface and react to form a bonding layer. The research results show that PUEE materials have significant application potential in the field of anodic bonding and packaging of flexible devices. |
| Key words: Three-layer Anodic Bonding PUEE Packaging Bonding interface Bonding performance |