| 引用本文: | 岳远霞,罗磊,朱洪强,吴泽邦,尹开慧,杨英.Mn修饰石墨烯作为H2S气敏材料的研究[J].材料科学与工艺,2026,34(3):20-26.DOI:10.11951/j.issn.1005-0299.20240183. |
| YUE Yuanxia,LUO Lei,ZHU Hongqiang,WU Zebang,YIN Kaihui,YANG Ying.Mn-modified graphene as a gas-sensing material for H2S detection[J].Materials Science and Technology,2026,34(3):20-26.DOI:10.11951/j.issn.1005-0299.20240183. |
|
| 摘要: |
| 采用基于密度泛函理论的第一性原理计算方法,对H2S气体在过渡金属Mn修饰的石墨烯表面上吸附的行为进行了理论研究,计算了Mn原子修饰的石墨烯表面吸附H2S分子的吸附能、电荷转移量、差分电荷密度、总电子电荷密度和恢复时间并与原始石墨烯吸附H2S分子进行了比较。研究结果表明:在未经金属原子修饰的石墨烯表面(GN)上吸附H2S时,其吸附能大于-0.6 eV,气体与基底之间的有效电荷密度重叠低于0.1e/3,表明气体与基底之间未形成化学键,此吸附过程属于物理吸附;相比之下,当H2S气体被吸附到Mn修饰的含有一个C原子空位的石墨烯(Mn/SV-GN)与含有两个C原子空位的石墨烯(Mn/DV-GN )及掺入4个N原子的石墨烯(Mn/4N-GN)时,其吸附能低于-0.8 eV,气体与基底之间的有效电荷密度重叠超过了0.1e/3,气体与基底之间形成了化学键,此吸附过程为化学吸附,并且C空位的增加及N原子的掺入降低了Mn原子修饰的石墨烯表面与气体之间的相互作用;从吸附气体后的恢复时间来看,在温度等于300 K,入射频率为5.2×1014和1.0×1016 Hz时,Mn修饰掺入4个N原子的石墨烯(Mn/4N-GN)恢复时间分别为12.1与6.3 s,是很有发展前景的H2S气敏传感器。 |
| 关键词: 3D过渡金属 Mn 石墨烯 吸附 第一性原理 |
| DOI:10.11951/j.issn.1005-0299.20240183 |
| 分类号:O469 |
| 文献标识码:A |
| 基金项目:国家自然科学基金资助项目(12104076);重庆市自然科学基金资助项目(CSTB2023NSCQ-MSX0207,CSTB2023NSCQ-MSX0425);重庆市技术创新与应用发展专项(cstc2021jscx-gksbX0028);重庆市教委科学技术研究计划(KJQN202200507, KJQN202300513, KJQN202200569);重庆市教委科学技术研究项目(KJZD-K202300516);重庆市高等教育教学改革研究项目(223145);重庆市研究生教育“课程思政”示范项目资助(YKCSZ23102). |
|
| Mn-modified graphene as a gas-sensing material for H2S detection |
|
YUE Yuanxia, LUO Lei, ZHU Hongqiang, WU Zebang, YIN Kaihui, YANG Ying
|
|
(College of Physics and Electronic Engineering, Chongqing Normal University, Chongqing 401331, China)
|
| Abstract: |
| In order to investigate the adsorption behavior of H2S on pristine and Mn-modified graphene, we conducted simulations using first-principles plane-wave ultrasoft pseudopotentials within the framework of density-functional theory. These simulations enabled calculations of key parameters, including the adsorption energy, charge transfer, differential charge density, and recovery time of H2S molecules adsorbed onto the graphene surface. The corresponding results revealed the adsorption energy of H2S gas on the unmodified graphene surface (GN) exceeded -0.6 eV, the effective charge density between the gas and the substrate overlapped was below 0.1e/3, showing physical adsorption characteristics. However, the adsorption energies of H2S gas on the Mn-modified graphene with single C-vacancy (Mn/SV-GN), double C-vacancies (Mn/DV-GN) and four N-doped graphene (Mn/4N-GN) were less than -0.8 eV, the effective charge density overlap between the gas and the substrate were more than 0.1e/3, indicating a chemical adsorption process. Moreover, the increased C-vacancy concentration and N-doping reduced the interaction between Mn-modified graphene surface and H2S gas. At 300 K with incident frequencies of 5.2×1014 Hz and 1×1016 Hz, the recovery time of Mn-modified graphene (Mn/4N-GN) doped with four N atoms exhibited recovery times of 12.1 and 6.3 s respectively, demonstrating its potential as a promising H2S gas detector. |
| Key words: 3D transition metal Mn graphene adsorption first principles |