| Related citation: | Mohammed Benyettou,Kouider Madani,Amin Houari,Handa Ladjal,Safaa Chahrazad Djebbar,[KH-8/9][HJ][JZ]Mohamed Belhouari,Salah Amroune,Ahmed Chellil.Finite Element Analysis of Geometrically Modified Adhesive Joints in Aluminum Alloy Assemblies[J].Journal of Harbin Institute Of Technology(New Series),2026,33(5):38-54.DOI:10.11916/j.issn.1005-9113.2025055. |
|
| |
|
|
| This paper has been browsed 0 times , downloaded 0 times |
 码上扫一扫! |
|
|
|
Finite Element Analysis of Geometrically Modified Adhesive Joints in Aluminum Alloy Assemblies
|
|
| Author Name | Affiliation | | Mohammed Benyettou | Department of Mechanical Engineering, University of Sidi Bel Abbes, Mhidi 22000, Sidi Bel Abbes, Algeria | | Kouider Madani | Department of Mechanical Engineering, University of Sidi Bel Abbes, Mhidi 22000, Sidi Bel Abbes, Algeria | | Amin Houari | Department of Mechanical Engineering, MHamed Bougara University of Boumerdes, Boumerdes 35000, Algeria | | Handa Ladjal | Department of Mechanical Engineering, University of Sidi Bel Abbes, Mhidi 22000, Sidi Bel Abbes, Algeria | | Safaa Chahrazad Djebbar | Department of Mechanical Engineering, University of Sidi Bel Abbes, Mhidi 22000, Sidi Bel Abbes, Algeria Faculty of Mechanical Engineering and Process Engineering, University of Science and Technology Houari Boumediene, Algiers 16111, Algeria | | [KH-8/9][HJ][JZ]Mohamed Belhouari | Department of Mechanical Engineering, University of Sidi Bel Abbes, Mhidi 22000, Sidi Bel Abbes, Algeria | | Salah Amroune | Mechanical Engineering Department, Faculty of Technology, University of MSila, MSila 28000, Algeria | | Ahmed Chellil | Department of Mechanical Engineering, MHamed Bougara University of Boumerdes, Boumerdes 35000, Algeria |
|
| Abstract: |
| Adhesive bonding is widely used in many industries, including civil engineering. Since adhesives usually have a lower strength than the materials they join, selecting the right adhesive is essential for ensuring durable joints. One of the main challenges is the concentration of stresses at the free edges, which can lead to premature failure. To address this issue, researchers have suggested modifying the overlap geometry by adding tapers or fillets to improve load distribution and minimize stress concentrations. This study evaluates the mechanical performance of a bonded joint between two aluminum alloy plates using Adekit A140 adhesive through finite element analysis. We investigate geometric modifications to the free edges of the plates and the adhesive to mitigate stress concentrations. The analysis considers parameters such as overlap length, applied load and the specific edge geometries of the adhesive and substrates. The results clearly demonstrate that the joint's mechanical strength is strongly influenced by these geometric alterations, which depend closely on the overlap length, underlining their importance in enhancing joint performance. The choice of optimal geometric parameters for modifying the adhesive and plate edges significantly reduces stress concentrations and ensures good mechanical resistance for large overlap lengths. However, for shorter overlaps, these modifications may reduce the joint's strength. |
| Key words: adhesive fillet internal tapering of the plate overlap length mechanical behavior |
| DOI:10.11916/j.issn.1005-9113.2025055 |
| Clc Number:TG453 |
|
|
|
|