Yuan Haozhen , Zhang Zixin , Huang Xin , Li Yun
2026, 58(7):1-11. DOI: 10.11918/202504005
Abstract:As the primary medium in shallow coral reef formations, calcareous sand composed of marine bioclastic debris from reef-building corals exhibits unique pore structure characteristics and surface morphology that significantly differ from traditional terrigenous sand. These distinctions profoundly influence the critical mud infiltration and membrane formation characteristics at excavation faces during slurry shield tunnelling. To comprehensively reveal the macro-microscopic mechanisms of slurry infiltration in South China Sea calcareous sand strata, this study innovatively developed a CT-compatible miniature slurry infiltration column test system. Membrane formation experiments were conducted using sodium bentonite slurries of varying concentrations, with CT scanning technology employed to visualize the microscopic structure of sand columns and spatial distribution patterns of slurry particles. The research findings indicate: 1) Pore characteristic differences: Under identical gradation conditions and sample preparation methods, calcareous sand demonstrates higher porosity and permeability compared to terrigenous sand, attributed to its polygonal particle morphology and internal pore structure. 2) Permeability coefficient sensitivity: Both sand types show significant linear positive correlations between permeability coefficients and porosity, but calcareous sand exhibits higher sensitivity to porosity variations. 3) Difference in filter cake quality: When slurry infiltration is performed in the same type of sand samples, the larger the grain size, the more unfavorable it is for filter cake formation. 4) Critical permeability threshold: An equivalent permeability coefficient range of 1×10-5 to 1×10-4 mm/s is identified as the critical interval, where filter cake air-blocking performance improves markedly when permeability coefficients fall below this threshold. 5) Microscopic mechanism analysis: CT 3D reconstruction reveals that slurry particles display non-uniform distribution patterns influenced by intermolecular forces. Post-infiltration observations show significant reductions in pore and throat sizes, along with deteriorated quantitative indicators of pore connectivity, constituting the primary microscopic mechanism for decreased overall permeability in sand columns.
Li Hao , Chen Shaokuan , Shi Mengtong , Liu Zeyuan
2026, 58(7):12-22. DOI: 10.11918/202505012
Abstract:To explore the influence of crew segments′ cross-line connections on crew scheduling in cross-line operation of metro trains, this paper formulated an extended set-covering model with the dual objectives of minimizing the number of duties and deadhead segments, subject to constraints on sign-on/sign-off shift ratio, work intensity, and crew segment connections. It constructed a spatio-temporal network graph to describe the connection relationships among crew segments and introduced the virtual duty opportunity arcs to compute the work intensity for cross-line crew segments. Moreover, the paper designed an improved column generation algorithm incorporating network graph reduction and duty opportunity selection strategies to obtain duties covering more crew segments or exhibiting higher work intensity. The results from a case study utilizing crew scheduling data from a partial metro network of a city show that the improved column generation algorithm enhances computational efficiency compared to traditional methods. The duties of the crew scheduling in cross-line duties are reduced by 4.5%; the average work efficiency is improved by 2.9%; the average work intensity is reduced by 4.7%, and deadhead segments are reduced by 56.8% compared to the cross-line connection. Under the cross-line duty mode, the balance of the sign-on/sign-off shift ratio at each crew rotation station has been improved. The sign-on/sign-off shift ratio at each rotation station can be flexibly adjusted based on crew preferences, which mitigates the spatio-temporal distribution differences among crew segments across different lines and enhances the flexibility of crew scheduling. By adjusting the working time and scope of duties, the work efficiency disparities between different duty types can be reduced, leading to a more balanced workload distribution among different duties.
Zhao Yang , Zhang Zhengqing , Kang Yu , Wang Jianjun
2026, 58(7):23-41. DOI: 10.11918/202505006
Abstract:With the development of intelligent networking technologies, it will be inevitable to form a mixed traffic flow of Connected Automated Vehicles (CAV) and Hand-driven Vehicles (HDV) in the future. The emergence of mixed traffic flow will alter the established laws of traditional traffic flow. Clarifying the characteristics of mixed traffic flow in road traffic accidents and studying the changes in traffic capacity on expressway accident sections can provide a theoretical basis for traffic early warning and management in future human-machine mixed driving environments.To investigate the interactive laws among traffic flow, accident duration, early warning length, and CAV penetration rate after expressway accidents in a human-machine mixed driving environment, this paper first divides the lane-changing area of expressway accident sections, establishes a cellular automaton model for human-machine mixed traffic flow under accident impacts, and compares and analyzes the average traffic flow and speed on a one-way two-lane expressway before and after accidents to study the changes in traffic capacity on accident sections. Simulations of traffic flow on expressway accident sections in a human-machine mixed driving environment using MATLAB show that:After an accident, when the CAV penetration rate is 0, the traffic capacity decreases by approximately 11.5% compared to before the accident.When the CAV penetration rate is 0.6, the average saturated flow stabilizes at around 1 520 veh/h, with a traffic capacity decrease of approximately 7.9%, but this is approximately 40.7% higher than when the CAV penetration rate is 0 under accident impacts.When the CAV penetration rate is 1, due to the formation of automated driving platoons, the average saturated flow can still reach a high level.Subsequently, based on the cellular automaton model of human-machine mixed traffic flow under accident impacts, the traffic capacity under different accident durations, early warning lengths, and CAV penetration rates is analyzed. The results show that:as accident duration increases, the impact of accidents on traffic flow becomes more significant, requiring longer time to alleviate traffic congestion.The average traffic flow does not continue to rise with increasing accident early warning length; instead, an excessively long early warning length leads to a slight decrease in the increase range of average flow.With the increase in CAV penetration rate, especially from low to high penetration rates, traffic capacity significantly improves.The study demonstrates that CAV has potential advantages in enhancing the accident resistance and traffic efficiency of transportation systems. The research findings provide a theoretical basis for alleviating traffic congestion, reducing the impact of traffic accidents, accelerating traffic flow recovery, and improving road traffic efficiency, with certain practical engineering application benefits and value.
Zhu Jinyu , He Siyu , Qi Fan , Gong Jiangang , Yang Rui , Wang Guiping
2026, 58(7):42-53. DOI: 10.11918/202406005
Abstract:To improve the capacity on the two-lane expressway merging zone, proposed a mainline advance lane changing diversion control strategy in intelligent and connected environment. Taking spatial location as the division principle, the total control zone is divided into lane changing adjustment zone and merging adjustment zone. For the lane changing adjustment zone, a lane changing decision optimization model is constructed to determine the optimal combination of lane changing vehicles with the objectives of improving the success rate of lane changing, two-lane capacity and average speed. Three-stage collaborative lane changing control algorithm is proposed, which generates the safe distance for the lane changing vehicles by using the time-distance planning model and adjusts the longitudinal distance of the vehicles based on the model predictive control, and finally implements the lane changing. Realize safe and efficient lane changing under group vehicles cooperative control, and create more merging space for ramp vehicles while weakening the impact on the subsequent traffic flow. For the merging adjustment zone, the first in first out rule is used to determine the merging order of vehicles, and the optimal control algorithm is used to optimize the vehicle trajectories to achieve efficient merging. Using SUMO and Python for simulation verification, the results show that the proposed control strategy always outperforms the other three control algorithms in reducing the average vehicle delay time and increasing the average vehicle speed. The method also effectively reduces the speed fluctuation of the vehicles when merging on the ramp and improves driving comfort. The number of vehicles lane changing successfully further verifies the superiority of the mainline advance lane changing diversion control strategy.
Li Yan , Wei Xiaoxiao , Chen Guizhen , Li Yuran , Ma Jing
2026, 58(7):54-61. DOI: 10.11918/202507041
Abstract:In order to solve the problem that algorithm deployed on roadside equipment are difficult to guarantee the efficiency and accuracy of the vehicle trajectory extraction at the same time, an efficient lightweight object tracking algorithm DeepSORT-CKFaster was proposed. The algorithm alleviates the problem of label category imbalance and improves the generalization ability of the YOLOv5 object detection algorithm through the Cutmix data augmentation method. An adaptive feedback lightweight feature extraction network was proposed, which dynamically adjusted the feature extraction strategy, reduced redundant computing and frequent memory access, and realized the lightweight network and improved the efficiency of feature extraction. In the training process, an adaptive Kalman filter learning rate adjustment strategy was proposed, which automatically triggered the cosine descent or linear rise mechanism through real-time monitoring of the gradient statistics, so as to improve the convergence effect of the model on the basis of stable feature extraction. Combined with the YOLOv5 target detection algorithm, the vehicle trajectory can be effectively extracted. The results of the proposed algorithm verified by high-resolution video in Xi′an on two configuration platforms indicate that the average target tracking accuracy and average target tracking precision of the proposed algorithm are 92.2%, 1.106 m, respectively. The average target tracking speed of the proposed algorithm are 26.538 frames/s and 12.819 frames/s. Compared with the SORT algorithm and the basic DeepSORT algorithm, the average target tracking accuracy and average target tracking speed of the proposed algorithm are increased by 4.3%7.1% and 4.811 frames/s11.789 frames/s, respectively. The training time of the feature extraction model of the proposed algorithm is 6.2 h, and the computation amount is 1.376 GFLOPs, which is 72.1% of the training time and 71.8% of the model computation of the basic DeepSORT algorithm.
Cheng Guozhu , Lu Chengcheng , Fang Lizhuang , You Zhidong , Pan Yilei
2026, 58(7):62-70. DOI: 10.11918/202412043
Abstract:In order to ensure that the connected and autonomous vehicle (CAV) can safely and efficiently change lanes many times, aiming at the specific scene of CAV on the expressway at the exit of the dedicated lane, the lane-changing behavior of CAV is analyzed. Taking the sum of lane utility and lane-changing urgency exceeding the threshold as the condition to trigger the lane-changing intention, a forced lane-changing intention recognition model for the exit of the CAV dedicated lane on the expressway is constructed. Based on the game theory, the process of multiple lane change of vehicles is divided into two stages according to the different positions of conflict points, and the action strategy of each stage is formed. The safety, speed and comfort are taken as the evaluation indexes of game decision-making. The income matrix of the CAV game decision-making model is established, the income function is established, and the lane change game decision-making model is constructed. PreScan and MATLAB/Simulink are used for simulation verification. Under different working conditions, the lane change decision model is simulated. The results show that when the initial speed is set to 30 m/s and 31 m/s respectively, the game decision models in the two lane-changing scenes perform better in terms of lane-changing success rate.
Sun Xianglong , Bi Yankang , Wang Shulei , Zhao Hu
2026, 58(7):71-84. DOI: 10.11918/202411020
Abstract:To explore the selection behavior and psychological mechanisms of consumers in cold regions towards electric vehicles, this study proposes an analytical framework that combines text mining, a panel mixed Logit model, and the Unified Theory of Acceptance and Usage of Technology (UTAUT). Unlike the previous single perspective focusing on technology performance and policy incentives, this study starts from the dual perspectives of consumer psychology and vehicle attributes, constructs consumer profiles using online review data from automotive websites, and extracts key factors influencing consumer choices through the implicit Dirichlet distribution algorithm. Combined with a discrete choice experimental design, a panel mixed Logit model is used to estimate the model parameters using Hammersley Monte Carlo sampling, which in turn reveals the specific effects of different factors on choice intention. The results of the study show that the range in cold regions and the 100 km cost of a fuel vehicle have a significant impact on consumers′ choice of electric vehicles, while the impact of charging speed is relatively small. In addition, this study conducted an in-depth analysis of public psychological acceptance factors using improved UTAUT structural equation modelling, and found that innovativeness and perceived risk play a key role in consumer decision-making in cold regions, with innovative consumers being more accepting of new technologies and having lower perceived risk. Based on these findings, this study proposes targeted policy recommendations from the perspectives of automotive pendant websites, electric vehicle manufacturers, related companies, and the government to promote the further development of the electric vehicle market in cold regions.
Li Bing , Zhou Xiaoqian , Xuan Hua
2026, 58(7):85-96. DOI: 10.11918/202502033
Abstract:The optimization of customized bus route with multiple boarding sites and alighting sites considering heterogeneous fleet is studied. Aiming at minimizing passenger trip cost and bus operating cost, the problem is formulated as a mathematical programming model where some constraints indicating the boarding and alighting mode, site number, the length of bus route, the number of customized buses are considered. The traditional methods are not efficient in solving large-scale mathematical models. So a deep reinforcement learning procedure based on Actor-Critic dual neural network is proposed. Here the customized bus is regarded as agent. The learning environment of the agent is established by the unsupervised clustering approach. And then the state space-action space-reward function of the agent is presented and a Actor-Critic double neural network is given to select and evaluate boarding sites and alighting site. So a deep reinforcement learning algorithm based on Actor-Critic dual neural network is obtained. The coordinate data of boarding-alighting sites and resident trip is collected together to set up testing experiment. These hyper-parameters, which is composed of learning rate, discount factor, batch size and number of neurons, are debugged by New Actor neural network and Old Actor neural network. The customized bus route scheme based on multiple boarding sites and alighting sites can be obtained by the proposed deep reinforcement learning algorithm. The performance measures, which consist of the layout of boarding and alighting sites, customized bus route distance, bus occupancy rate and bus type allocation, verify the rationality of the customized bus route scheme. The deep reinforcement learning algorithm based on single Actor neural network is used as a comparison testing. The convergence speed of proposed algorithm is improved by 28.57% and the reward value is increased by 13.65%. Furthermore, compared with the heuristic algorithms, this paper also verifies that the proposed method can quickly and efficiently complete the model solution, and reasonably determine the location of the customized bus stops and the specific route direction.
Wu Yao , Zhan Zhibin , Zhang Yizhi , Zhou Jibiao , Liu Pei
2026, 58(7):97-108. DOI: 10.11918/202412028
Abstract:To investigate the factors influencing the severity of accident in CAVs(connected-autonomous vehicles), this study utilizes publicly available accident data from the DMV(U.S. Department of Motor Vehicles) website between 2016 and 2023. The Boruta method was first applied to process the traffic accident data, identifying 14 input variables such as time, location, speed limit, and weather conditions. A CatBoost multi-class classification model was then developed, and hyperparameters were optimized using the TPE(Tree-structured Parzen Estimator ) method. The evaluation model achieved an average AUC(Area Under the Curve) of 0.86 under the optimal hyperparameter combination. Furthermore, the SHAP(SHapley Additive exPlanations explanation) model was utilized to reveal the global impact and contribution of significant factors to accident severity and explore the interactions between variables. The results show that road type, season, vehicle motion state, and accident type are strongly correlated with accident severity. Rear-end collisions, adverse weather, and poor road conditions increase the risk of severe accidents. This research provides a TPE-CatBoost-SHAP analysis framework for safety assessment in CAVs, offering insights into improving their safety performance.
Wang Xiaopeng , Zhou Yongjun , Hou Peiyuan , Li Yi , Liu Yili , Wang Bo
2026, 58(7):109-119. DOI: 10.11918/202505017
Abstract:To investigate the wear mechanism of hanger connectors, quantify the wear depth of the fork-ear plate, and evaluate its impact on fatigue life, this study first identified wear damage locations and clarified the wear mechanism through field investigations and wear debris analysis. Based on actual traffic data and GNSS monitoring data, the hanger cable force and the longitudinal relative angle of the connectors were analyzed. The Archard model was then applied to quantify the wear depth of the fork-ear plate, followed by fatigue life assessment. The results indicate that the brown-red wear debris from hanger connectors primarily consists of Fe2O3, originating from wear between the fork-ear plate and the box-girder ear plate, with no wear debris from the spherical bearing detected. Hanger back-twist and cable-girder relative motion are the root causes of plate wear. The relative longitudinal rotation angle of hanger connectors predominantly ranges between -3° and 3°, following a Gaussian distribution. After 5 years of service, the wear depth of the fork-ear plates reaches approximately 0.207 mm, exhibiting progressive growth over time but with a decelerating rate. The fatigue life loss of the fork-ear plate after 5,0, 5,0, 25, and 30 years of operation is 7.59%, 13.08%, 18.89%, 23.75%, 28.54%, and 33.23%, respectively. Both hanger back-twist and wear between plates significantly reduce the fatigue life of the fork-ear plate, necessitating comprehensive consideration in the design of hanger connectors.
Sun Zhe , Wang Feng , Zou Zhuoyi , Li Sen , Li Jiawu
2026, 58(7):120-134. DOI: 10.11918/202502028
Abstract:This paper investigates the wind speed characteristics of bridges located in complex mountainous terrain. Wind tunnel tests were conducted using a terrain model of the bridge site, created based on a 5 km diameter area and scaled at 1∶1 000. A three-dimensional pulsating anemometer was employed to collect and analyze wind speed data at various heights under different wind directions. The study found that when wind flows from the trumpet-shaped estuary, wind speed at the bridge site is relatively high, and wind characteristics along the bridge alignment are well correlated. Turbulent flow fields can mitigate terrain-induced acceleration and shielding effects. Uniform flow fields exhibit higher topographic correction coefficients during river inflow, whereas the opposite is observed in mountainous regions. At varying wind direction angles, significant fluctuations occur at mid-span measurement points in both uniform and turbulent flow fields, making it difficult to describe them using a single model. The variation trend of the wind profile index under different flow conditions aligns with that of the wind direction angle. A top-down approach was adopted to calculate wind speed on the bridge deck in the canyon area. A constrained least squares method was proposed to fit the wind profile index at the vertices of the constrained section in the canyon area. The determination coefficient of the constrained least squares method was found to be similar to that of the traditional least squares method, validating the fitting results. It is proposed to use the index derived from low-height data fitting to calculate the design reference wind speed for the bridge deck in canyon areas. Comparative analysis shows that this method enhances the accuracy of design reference wind speed estimation and facilitates wind speed analysis at the bridge site across various wind directions using a unified index model.
Zhao Yu , Jia Mengyi , Zhou Yongjun , Yao Tianyun , Chen Pengyu , Hou Peiyuan
2026, 58(7):135-149. DOI: 10.11918/202409016
Abstract:In order to solve the fatigue problem for stayed cables of rail-road cable-stayed bridges with utra-long span, this paper adopts a combination of simulation and theoretical calculation to study the fatigue load model of stayed cables. Firstly, bases on the fitting result of traffic flow datas, the Monte-Carlo method is used to generate random traffic flow on the highway and determine the load of the highway; For railway load, the operation status of railway trains at Changzhou Station is investigated, and the railway train load is determined as the railway fatigue load model. Secondly, a finite element model of the Changtai Yangtze River Bridge is established, with eight stayed cables on the upstream side as the research object. The influence surface of the stayed cables is analyzed, and the stress history and equivalent stress amplitude of the stayed cables under the action of highway and railway loads are calculated. At the same time, a comparative analysis is conducted between the equivalent stress amplitude under the combined action of random traffic flow and railway load and the equivalent stress amplitude under the action of only railway load, to study the influence of highway load on the fatigue effect of rail-road bridges. Finally, a fatigue load spectrum for highway is developed, and a standard fatigue vehicle model for highway is proposed. Analysis shows that for rail-road bridges, the equivalent stress amplitude calculated by considering both highway and railway load is greater than that calculated by considering only railway load, the difference between the two is 34.23%. Therefore, the influence of highway load cannot be ignored when conducting fatigue effect analysis of bridges. At the same time, the fatigue effect of the compiled highway fatigue load spectrum and train load is 1.12 times that of the calculation results of random traffic flow and train load on the highway, indicating that the compilation result is relatively accurate. Finally, calculations show that the inclined stayed cables of Changtai Yangtze River Bridge have good fatigue performance. The research results of this article can be used for fatigue calculation for stayed cables of rail-road cable-stayed bridges with utra-long span in this region. At the same time, the research method of this article can also provide ideas for the study of fatigue load models of other ultra-long span bridges.
Xiao Lili , Ma Zhining , Wang Jiajia , Xue Diansheng , Li Yazhen , Fu Ji , Liu Kechen
2026, 58(7):150-165. DOI: 10.11918/202504022
Abstract:Local scour is a major factor affecting the inclination and even the collapse of bridge structures. A design method for local scour prevention and control that considered the influence of pile group arrangements should be proposed. Therefore, this paper conducted flume physical model tests, featuring a total of 12 arrangements, including double piles in series, double piles in parallel, a square pattern of four piles, and multi-angle inclined double piles with varied center distances, so as to evaluate the impact of different pile group arrangements on local scour characteristics. Binocular vision 3D reconstruction technology and Flow-3D numerical simulation were employed to analyze the evolution of scour terrain and changes in flow fields under diverse influencing factors and pile group arrangements. Results show that pile groups in series, affected by the "enhancement effect" and "shielding effect", have both upstream and downstream piles with scour depths shallower than that of a single pile, which is beneficial to bridge stability; pile groups in parallel, due to the "confined horseshoe vortex effect", form "8"-shaped scour pits with distinct traces between piles, worsening the scour effect; pile groups featuring a square pattern of four piles, under the combined action of multiple effects, develop scour pits with mixed series-parallel features, and a smaller pile center distance indciates a narrower scour pit range but a greater depth; when water flows strike obliquely, upstream piles suffer more severe scour, creating oblique "8"-shaped scour pits. Moreover, as the incident angle increases from 25° to 75°, the maximum scour depth gradually increases while the pit shape transitions from series-like to parallel-like. It is suggested that bridge pile groups should adopt optimized arrangements that can effectively weaken the "confined horseshoe vortex effect", rationally leverage the "shielding effect", and help reduce the maximum scour depth.
Xiao Jun , Xian Jianping , Tong Chaokang , Ma Jianyong , Wang Peijie , Liu Yongjian
2026, 58(7):166-174. DOI: 10.11918/202412066
Abstract:To investigate the protective effectiveness of strand wrapping wire in suspension bridge main cables, a method combining refined finite element models with full-scale bridge testing was adopted to study the variations in wrapping wire tension throughout the process. Based on the validated finite element models, the impacts of the wrapping wire insertion force, main cable diameter, and main cable radial elastic modulus on tension loss were analyzed. A formula for calculating the wrapping wire insertion force, which takes into account tension loss during the wrapping wire stage, was proposed, and the existing wrapping wire process was improved. Experimental results indicate that tension loss during the wrapping wire stage is primarily caused by radial deformation of the main cable due to subsequent wrapping wire tensions. The tension loss exhibits an initial rapid decrease, followed by a slower rate, and gradually stabilizes, ranging between 26.3% and 37.3%. When the wrapping wire tension stabilizes at the test location, the wrapping wire machine advances an average distance of 25.2 cm relative to the test position. Finite element analysis results reveal that the main cable diameter and radial elastic modulus have significant effects on the proportion of wrapping wire force loss, with both factors showing an inverse proportional relationship with the force loss ratio. In the case of a main cable with a diameter of 851.9 mm, an increase in the main cable diameter by 50% reduces the wrapping wire force loss ratio from 27.8% to 13.7%, and an increase in the main cable radial elastic modulus from 1 052 MPa to 3 052 MPa reduces the force loss from 27.8% to 11.3%. Based on the experimental and finite element analysis results, a formula for calculating the insertion force that considers tension loss during the wrapping wire stage was further refined. Additionally, a novel wrapping wire process based on Mechanism of wrapping wire tension loss was introduced, which can effectively reduce tension loss during the wrapping wire process.
Cao Xiaolin , Zeng Leping , Zhou Fengxi , Gao Zhigao , Dai Guoliang , Wang Zhiqiang
2026, 58(7):175-187. DOI: 10.11918/202505040
Abstract:To explore the influence of vertical loads on the horizontal vibration of pile foundations under the action of Rayleigh waves, based on the theory of porous continuous media, a theoretical calculation model is established for the dynamic response of single piles in unsaturated soils under the coupled action of Rayleigh waves and vertical loads. Considering the pile-soil interaction and the combined effect of Rayleigh waves and vertical loads, and using the Timoshenko beam theory, the analytical solution of the horizontal dynamic response of piles in unsaturated soil foundations is given. Based on the numerical results and compared with the existing calculation models, the correctness of this calculation model was verified, and the action mechanisms of parameters such as vertical load, dimensionless frequency and yield bending moment on the horizontal dynamic response of a single pile were discussed. The analysis results reveal: with the increase of vertical load and yield bending moment, the displacement, rotation, shear force and bending moment of the pile body all increase. With the increase of the dimensionless frequency, the displacement, rotation, shear force and bending moment of the pile body change significantly in the resonance region. The existence of the vertical load P doubles the amplitudes of the pile body displacement and rotation Angle, and the amplitudes of bending moment and shear force increase to a certain extent. This study finds that the influence of vertical loads on the horizontal dynamic response of pile foundations under the action of Rayleigh waves cannot be ignored, and considering the combined action of vertical loads and Rayleigh waves to analyze the dynamic response of pile foundations is more in line with the actual engineering situation.
Wu Min , Deng Tao , Liu Qijian , Zhang Peng , Chen Gang , Liu Zhengqiang
2026, 58(7):188-195. DOI: 10.11918/202501036
Abstract:Based on the pile foundation project of the Kemen Port Railway Bridge in Fuzhou, this study systematically investigates the lateral displacement characteristics of coastal deep soft soil under the influence of factors such as heap loading width, height, proximity to the pile foundation cap, and time effects through large-scale one-sided ground loading and inclinometer tests. Additionally, an analysis of the internal slip patterns of the soft soil under loading conditions is conducted, incorporating Terzaghi′s bearing capacity theory to propose a calculation method for the lateral displacement influence range of the soft soil layer resulting from the heap loading. The results indicate that the upper layers of the soft soil are prone to developing potential slip surfaces under various loading conditions, with the horizontal displacement curve along the depth exhibiting a generally "double-broken line" distribution. The displacement in the upper layer is significant, while the steep drop section below 10 meters depth shows relatively small displacement. During subsequent loading, the horizontal displacement or deformation of the soil layers tends to accommodate the earlier formed slip surfaces, resulting in the depth of these slip surfaces remaining relatively unchanged despite increases in heap loading width or height. The group pile foundation significantly mitigates the horizontal displacement of the soil mass above the slip surfaces in the soft soil, with the measured displacement being approximately half of that observed under the same conditions without obstruction. In the site loading tests, the consolidation displacement value of the soft soil accounts for approximately 33.5% of the total displacement, representing an important component of the lateral displacement in coastal deep soft soils. Based on Terzaghi′s bearing capacity theory, a method for calculating the limit horizontal distance and depth of influence of loading after the formation of slip surfaces in deep soft soils is proposed, with the calculated results aligning closely with on-site measurements. This study provides valuable references for the design and construction of similar large-area heap loading projects on deep soft soils.
Sun Shanshan , Wang Xiaolun , Zhang Changguang , Li Yude
2026, 58(7):196-204. DOI: 10.11918/202508059
Abstract:To reasonably describe the influence of unsaturated characteristics, soil arching effect, and its development on the non-uniform distribution of vertical earth pressure on a positive buried pipe culvert, this paper assumed both uniform and linear suction distributions, extended the arch-shaped non-uniform distribution function, and derived the analytical solution for non-uniform distribution of vertical earth pressure on a positive buried pipe culvert using the unsaturated soil theory. Moreover, this paper verified the correctness of the analytical solution by comparing it with field-measured data, model test data, and existing theoretical solutions and discussed the influencing laws of parameters. The results show that the obtained analytical solution of non-uniform distribution can be conveniently used to calculate the magnitude and non-uniform distribution of vertical earth pressure at any height above the pipe culvert crown, and it can effectively reflect the combined effects of unsaturated characteristics, soil arching effect and its development, equal settlement plane height, and pipe culvert categories; as the matric suction, suction angle, and effective internal friction angle increase, the vertical earth pressure at the pipe culvert crown significantly increases due to the enhanced downward frictional force of the soil arching effect; the vertical earth pressure at the pipe culvert crown under uniform suction is greater than that under linear suction, but the non-uniform shapes of vertical earth pressure are basically the same; the soil arching effect develops with the increase of the filling height, and the non-uniform shape of vertical earth pressure changes significantly until it tends to be stable after the occurrence of the equal settlement plane.
You are the visitor 
Address:Box 136, 92 Xidazhi Street, Nangang District, Harbin
Postcode:150001 E-mail:hitxuebao@hit.edu.cn
ICP:京ICP备09084417号-23
Copyright:Journal of Harbin Institute of Technology ® 2026 All Rights Reserved
