Second-order discontinuous finite element characteristic-line coupled method for neutron transport calculations
CSTR:
Author:
Affiliation:

(Institute of Nuclear Science and Technology, School of Energy Science and Engineering, Harbin Institute of Technology, Harbin 150001, China)

Clc Number:

TL323

Fund Project:

undefined

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
  • |
  • Comments
    Abstract:

    The axial function expansion method for neutron transport offers a novel full-core, high-fidelity transport calculation approach with the advantage of stable iterative convergence, avoiding the numerical instabilities that traditional 2D/1D methods may encounter under strongly heterogeneous conditions. However, most existing axial expansion implementations use only first-order (linear) axial trial functions; achieving sufficient accuracy therefore requires very fine axial meshes, leading to a substantial increase in the number of axial layers and high memory usage. To address this issue, this paper extends the axial expansion to second-order (quadratic) trial functions. Analytical solutions for the inverse and matrix exponential of the resulting 3×3 coefficient matrix are derived, and the performance of the second-order solver is implemented and validated on the 3D C5G7 international benchmark. The results demonstrate that with relatively coarse axial meshes, the quadratic approximation significantly improves the pin-wise power calculation accuracy (reducing the relative power error to about 1/2-1/5 of that of the first-order method), and decreases the number of axial layers required to achieve equivalent accuracy to roughly one-third of that needed by the linear method, thereby reducing the memory requirement by roughly 50%. Concurrently, the quadratic method also retains stable iterative convergence behavior. However, due to the diminished effectiveness of the conventional coarse-mesh finite-difference (CMFD) acceleration scheme on large axial mesh cells, the quadratic approximation requires more iterations to converge than the first-order method, so no significant reduction in total computing time was observed. In summary, the proposed second-order axial expansion method maintains high-fidelity in whole-core transport calculation accuracy while substantially lowering the mesh density and memory demand, which is of great significance for the development of efficient high-fidelity reactor-physics simulation tools.

    Reference
    Related
    Cited by
Get Citation
Related Videos

Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:April 28,2025
  • Revised:
  • Adopted:
  • Online: October 27,2026
  • Published:
Article QR Code