Abstract:Daytime radiative cooling technology reflects the energy of the solar wavelength band (0.3-2.5 μm) strongly and exchanges energy with outer space at a temperature of 3 K through the "atmospheric window" (8-13 μm), achieving cooling below the ambient temperature without additional energy input. However, existing radiative cooling technology also strongly reflects solar wavelength energy in cold winters, dramatically increasing the energy consumption of building heating. This study prepared a temperature-adaptive radiative cooling coating with phase change and temperature control function. Through the reversible opening and closing reaction of crystalline violet lactone at different temperatures, a solar reflectance control range of 33% within 10-40 ℃ was achieved, with a solar reflectance of 92% in summer and 59% in winter. Actual building tests show that after applying this coating, the average indoor temperature in summer is reduced by 3 ℃, and that in winter is reduced by only 0.1 ℃. According to calculations, the annual carbon reduction rate in Chongqing after applying the coating is 15.7%, which is 5.0% higher than that of the traditional radiative cooling coating, and it can effectively reduce peak electricity loads and reduce power grid operation and expansion costs. The coating is simple to prepare and inexpensive, breaking through the geographical limitations of traditional radiative cooling coatings that are only suitable for some warm and hot regions. It has excellent cross-climate applicability and can be used on a large scale in most cities where the hot and cold load ratio is greater than 0.05.