Decarbonization characteristics of coal combustion flue gas based on a novel ammonia method
CSTR:
Author:
Affiliation:

(1.Xi′an Aerospace Source Power Engineering Company Limited, Xi′an 710100, China; 2.School of Energy Science and Engineering, Harbin Institute of Technology, Harbin 150001, China)

Clc Number:

TK534.9

Fund Project:

undefined

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
  • |
  • Comments
    Abstract:

    Ammonia-based carbon capture is among the most promising flue-gas CO2 capture technologies, yet high energy consumption for solvent regeneration remains a key barrier to industrial deployment. To address this, a novel ammonia-based process was investigated in which ethanol is used to partially replace water in the solvent to promote the solvo-crystallization of NH4HCO3; crystalline regeneration is expected to reduce the energy required for CO2 recovery. Under the concentration of 14% CO2 and 4.16 mol/L of ammonia, the CO2 absorption characteristics at different temperatures and ethanol concentrations were studied by bubble reactor. The physicochemical structure of crystallization was analyzed and the influence of residence time on the particle distribution was explored. The results show that 10-15 ℃ is the optimal temperature for the new ammonia-based method. The CO2 removal rate is 64.8% and the volumetric mass transfer coefficient reaches 3.44×10-4 mol/(m3·s·Pa) at the stable absorption section. Increasing the ethanol volume fraction from 30% to 50% enhanced the solvent CO2 removal efficiency by 10.44% and increased the overall volumetric mass transfer coefficient by 8.86%. The addition of ethanol is beneficial for the occurrence of crystallization in the flue gas-ammonia-ethanol system. Spontaneous nucleation occurred after 60 minutes of reaction, and a CO2 loading capacity of the absorbent reaches 0.521 7, equivalent to a CO2 absorption capacity of 1.35 kg CO2 per kg NH3; extending the residence time of crystallization can improve the surface morphology and growth of crystals, which is beneficial for crystal stability and solid-liquid separation. Scanning electron microscopy (SEM) results show that defects exist after 30 minutes of crystal growth. The XRD analysis indicates that the main component of the crystallization product is ammonium bicarbonate.

    Reference
    Related
    Cited by
Get Citation
Related Videos

Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:May 06,2025
  • Revised:
  • Adopted:
  • Online: October 27,2026
  • Published:
Article QR Code