Analysis of interaction mechanism between electric field and ice coating of DC composite insulator
CSTR:
Author:
Affiliation:

(1.School of Mechatronics and Vehicle Engineering, Chongqing Jiaotong University, Chongqing 400074, China; 2.State Key Laboratory of Transmission and Distribution Equipment and System Safety and New Technology (Chongqing University), Chongqing 400044, China)

Clc Number:

TM85

Fund Project:

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
  • |
  • Comments
    Abstract:

    To investigate the icing mechanism of composite insulators and ensure the safety of power grids and transmission lines, a coupled-field numerical model for composite insulator icing was proposed. Using the FXBW-35/70 composite insulator as the test specimen, the motion control equation of water droplets under the interaction of airflow and electric fields was established. The electric force distribution acting on droplets at different locations of the insulator surface was analyzed. The Influence of wind speed and droplet diameter on the local collision coefficient (α1) and the droplet deflection(Δs) under a DC electric field was examined. Furthermore, the overall collision coefficient (β1) of the insulator surface under different icicle distributions was calculated and analyzed. Finally, dry and wet icing growth experiments were conducted to verify the numerical results. The results show that the electric field strength decreases successively from insulator shed edge to the insulator surface and rod. For both charged and uncharged droplets, α1 reaches its maximum at the stagnation point and decreases gradually toward both sides. Increasing wind speed or droplet diameter enhances α1 for both droplet types. Charged droplets experience stronger electric field attraction, leading to a higher α1 than uncharged droplets, and the deflection due to the electric field gradually decreases from the high-voltage to the grounded end, with a maximum deflection of up to 30%. Reducing wind speed or droplet diameter, or increasing the length or number of icicles, significantly decreases β1. Under dry growth conditions, the icing morphology is more regular without an electric field, whereas under a DC electric field, the icing rate increases and the morphology becomes irregular. Under wet growth conditions, water droplets coalesce into a film, promoting icicles growth. Without an electric field, the icing rate decreases markedly, while under a DC field, icicles become curved and distorted. This study provides a technical reference for understanding the icing mechanism of composite insulators under electric fields and for developing accurate numerical simulation methods.

    Reference
    Related
    Cited by
Get Citation
Related Videos

Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:November 28,2024
  • Revised:
  • Adopted:
  • Online: October 11,2026
  • Published:
Article QR Code