结冰特性动态感知与定量探测技术研究现状与展望
CSTR:
作者:
作者单位:

(1.北京理工大学 机械与车辆学院,北京 100081;2.多谱信息智能处理技术全国重点实验室(华中科技大学), 武汉 430074;3.华中科技大学 人工智能与自动化学院,武汉 430074;4.东北农业大学 工程学院,哈尔滨 150030;5.青岛海尔空调器有限总公司,山东 青岛 266100;6.武汉航空仪表有限责任公司,武汉 430000)

作者简介:

石含(2000—),男,博士研究生;宋孟杰(1984—),男,教授,博士生导师

通讯作者:

中图分类号:

TB69

基金项目:

河北省科学技术厅2024年度燕赵黄金台聚才计划骨干人才(科技平台)项目(244A7625D);北京市科学技术委员会、中关村科技园区管理委员会科技支撑项目(Z231100006123010);国家自然科学基金面上项目(52576006)


Status and prospects of dynamic sensing and quantitative detection technologies for icing characteristics
Author:
Affiliation:

(1.School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China; 2.National Key Laboratory of Multispectral Information Intelligent Processing Technology (Huazhong University of Science and Technology), Wuhan 430074, China; 3.School of Artificial Intelligence and Automation, Huazhong University of Science and Technology, Wuhan 430074, China; 4.College of Engineering, Northeast Agricultural University, Harbin 150030, China; 5.Qingdao Haier Air Conditioner Co., Ltd., Qingdao 266100, Shandong,China; 6.Wuhan Aviation Instrument Co., Ltd., Wuhan 430000, China)

Fund Project:

undefined

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    结冰现象在工业界与自然界中广泛存在,且常引发设备故障、交通隐患等各类不利影响。本文系统梳理了既有结冰探测技术的分类、原理及发展趋势,针对冰的声学、光学、热学、电学、力学5类物理特性分类,横向对比各特性下接触式与非接触式结冰探测传感器的探测范围与精度指标。分析结果表明:声学法和光学法接触式探冰技术适用于微米至毫米尺度冰层或水膜探测,最高可实现8 μm厚度分辨率,可满足飞行器表面0.3 mm冰层探测需求;冰内微尺度气泡与卤水通道引发显著的散射与干涉等会降低厚度探测精度,但同时为冰型区分提供了可量化的声学辨识基础;热学法接触式探冰技术通过监测冻结瞬间的潜热释放或冰体热阻和热容变化来实现,但难以精确区分毫米级厚度差异及不同冰型;电学法与机械法接触式结冰探测技术可稳定实现0.1~0.3 mm冰层厚度的探测精度,风洞实验表明,其可分辨0.06~0.45 mm的冰层,并已广泛用于飞行器、道路等结冰监测;对于风电叶片、输电线路等厘米级冰厚非接触实时监测需求,多采用探测精度1~10 mm的摄像式结冰探测技术;极地科考与航海运输所需的米级海冰探测,则依托空间分辨率达1 m且具备冰水区分、冰厚动态反演能力的微波及激光雷达遥感技术,以提供关键安全保障数据。进一步凝练了既有方法在多方案耦合精度提升与智能算法泛化能力增强方面的优化路径,为空天飞行器、寒区电网及海上风电等关键基础设施的冰灾防控提供理论支撑与实践路径。未来,结冰探测技术将借助声、光、热、电、力等多模态传感技术融合,实现冰型、冰厚、结冰面积等多参数高精度动态探测。

    Abstract:

    Ice formation is widespread in industrial and natural environments and often causes various adverse effects such as equipment failures and traffic hazards. This paper systematically reviewed the classification, principles, and development trends of existing ice detection technologies, and horizontally compared the detection ranges and accuracy indicators of contact and non-contact ice detection sensors under each property based on the classification of five physical properties of ice, namely, acoustics, optics, thermology, electricity, and mechanics. The analysis results show that acoustic and optical contact ice detection technologies are applicable to the detection of ice layers or water films at the micrometer to millimeter scale, achieving a maximum thickness resolution of 8 μm, which can meet the detection requirements of 0.3 mm ice layers on aircraft surfaces. Significant scattering and interference induced by micro-scale bubbles and brine channels within ice reduce the thickness detection accuracy, but simultaneously provide a quantifiable acoustic identification basis for ice type differentiation. Thermal contact ice detection technologies achieve detection by monitoring the latent heat release at the moment of freezing or the changes in thermal resistance and heat capacity of the ice body, but it is difficult to precisely distinguish millimeter-level thickness differences and different ice types. Electrical and mechanical contact ice detection technologies can stably achieve an ice layer thickness detection accuracy of 0.10.3 mm; wind tunnel experiments show that they can distinguish ice layers of 0.060.45 mm, and they have been widely used in ice monitoring of aircraft and roads. For the non-contact real-time monitoring requirements of centimeter-level ice thickness on wind turbine blades and transmission lines, camera-based ice detection technologies with a detection accuracy of 110 mm are mostly adopted. The meter-level sea ice detection required for polar scientific expeditions and maritime transportation relies on microwave and LiDAR remote sensing technologies with a spatial resolution of 1 m and the capabilities of ice-water differentiation and dynamic inversion of ice thickness, providing key safety guarantee data. Furthermore, the optimization paths of existing methods in improving the coupling accuracy of multiple schemes and enhancing the generalization ability of intelligent algorithms were further refined, providing theoretical support and practical paths for the prevention and control of ice disasters in key infrastructure such as aerospace vehicles, cold region power grids, and offshore wind power. In the future, ice detection technologies will integrate multimodal sensing technologies such as acoustic, optical, thermal, electrical, and mechanical sensing to achieve high-precision dynamic detection of multiple parameters, including ice type, ice thickness, and ice area.

    参考文献
    相似文献
    引证文献
引用本文

石含,宋孟杰,桂康,邵苛苛,葛俊锋,李岩,王飞,徐志强,王俊,张旋,张龙.结冰特性动态感知与定量探测技术研究现状与展望[J].哈尔滨工业大学学报,2026,58(10):195. DOI:10.11918/202508071

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2025-08-30
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2026-10-27
  • 出版日期:
文章二维码