交变磁场下导磁体涡流发热控制
CSTR:
作者:
作者单位:

(1.北京计算机技术及应用研究所,北京 100854; 2.哈尔滨工业大学(深圳) 集成电路学院,广东 深圳 518055)

作者简介:

杨小健(1986—),男,正高级研究员;李明雨(1971—),男,教授,博士生导师;祝温泊(1989—),男,教授,博士生导师

通讯作者:

中图分类号:

TM921

基金项目:


Control of eddy current heating in magnetic flux conductors under alternating magnetic field
Author:
Affiliation:

(1.Beijing Institute of Computer Technology and Applications, Beijing 100854, China; 2.School of Integrated Circuits, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, Guangdong, China)

Fund Project:

undefined

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为解决高频工况下圆锥形导磁体因涡流热累积导致的磁性能失效问题,突破传统设计中热磁性能难以协同优化的技术瓶颈,通过建立定量涡流热模型,提出瓣状切割结构优化方案。首先,基于磁通密度分布函数与焦耳热理论,建立了揭示涡流损耗功率与几何/电磁参数定量关系的数学模型。其次,针对圆锥导磁体非对称特性,创新性设计非对称瓣状切口重构涡流路径。最后,通过温度场测试、磁通密度分布实验,以及功率密度仿真验证方案有效性。结果表明,优化后的导磁体在维持焊点温度降幅仅1.8%的前提下,使最高温升区域温度降低28%,磁通分布测试显示未引起磁场畸变,仿真与实测误差小于5%。研究成果为高频导磁体设计提供了兼具理论精度与工程实用性的热磁协同优化方法。

    Abstract:

    To solve the magnetic performance failure of conical magnetic flux conductors caused by eddy current heat accumulation under high-frequency conditions and to break through the technical bottleneck that thermal and magnetic properties are difficult to co-optimize in traditional designs, this paper established a quantitative eddy current heating model and proposed an optimized segmented cutting structure scheme. First, based on the magnetic flux density distribution function and Joule heating theory, this paper established a mathematical model to reveal the quantitative relationship between eddy current loss power and geometric/electromagnetic parameters. Second, given the asymmetric characteristics of conical magnetic flux conductors, this paper innovatively designed asymmetric petal-shaped cuts to reconstruct the eddy current path. Finally, this paper verified the effectiveness of the scheme through temperature field tests, magnetic flux density distribution experiments, and power density simulations. The results show that the optimized magnetic flux conductor reduces the temperature of the maximum temperature rise region by 28% on the premise of maintaining a solder joint temperature drop of only 1.8%. Moreover, the magnetic flux distribution test indicates that no magnetic field distortion is caused, and the error between simulation and actual measurement is less than 5%. The research results provide a thermo-magnetic co-optimization method with both theoretical accuracy and engineering practicability for the design of high-frequency magnetic flux conductors.

    参考文献
    相似文献
    引证文献
引用本文

杨小健,崔鹏,崔启明,李昊松,任博达,张琪,张一凡,李明雨,祝温泊.交变磁场下导磁体涡流发热控制[J].哈尔滨工业大学学报,2026,58(8):240. DOI:10.11918/202502018

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2025-02-14
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2026-08-29
  • 出版日期:
文章二维码