Abstract:Soil and water loss induced by subsurface structure leakage is an important trigger for pavement collapse accidents, while traditional numerical methods have limitations in simulating large-deformation problems such as engineering-scale quick sand erosion. Therefore, this paper introduced the material point method and adopted a single-point two-phase coupling algorithm. Firstly, this paper verified the method through comparison with two model test results and then established an engineering-scale quick sand leakage model in shallow-buried pipelines to systematically analyze the influence laws of geometric parameters (opening width, opening angle, and pipeline’s burial depth), soil parameters (internal friction angle and cohesion), and hydraulic conditions (groundwater table depth) on leakage evolution. The results indicate that the soil disturbed zone presents three-stage evolution characteristics, including a rapid expansion stage, a quasi-stationary stage, and a stable growth stage; the plastic shear band extends upward in a “crescent shape” and penetrates the surface, forming a typical funnel-shaped settlement trough; the widening of the pipeline opening, the lateral shift of position, and the increase in burial depth all exacerbate soil loss and surface settlement; soil strength parameters can effectively retard leakage, among which the increase of internal friction angle can narrow the settlement trough, and cohesion has a critical threshold, beyond which the soil arching effect can be triggered to enable the quick sand to self-stabilize and stagnate; a high groundwater table reduces soil’s effective stress and enhances seepage drag force, thereby accelerating soil and water loss and broadening the settlement influence scope.