基于多基雷达的进动锥体目标角速度矢量估计
CSTR:
作者:
作者单位:

(哈尔滨工业大学 电子与信息工程学院,哈尔滨 150001)

作者简介:

张荣政(1995—),男,博士研究生;王勇(1979—),男,教授,博士生导师

通讯作者:

中图分类号:

TN975

基金项目:

国家杰出青年科学基金(62325104)


Estimation of angular velocity vector for precessing conical targets based on multi-static radar
Author:
Affiliation:

(School of Electronics and Information Engineering, Harbin Institute of Technology, Harbin 150001, China)

Fund Project:

undefined

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    弹道导弹飞行中段是预警探测与识别拦截的重要阶段。弹头等重型锥体目标在释放后,由于不可避免的横向力矩干扰,通常会呈现出自旋与锥旋合成的复杂进动运动。针对单、双基雷达条件下角速度矢量存在不可完全观测性,且现有参数估计算法严重依赖观测几何并对环境噪声敏感等问题,本文提出了一种基于多基雷达微动曲线的进动目标角速度矢量估计方法。首先,通过构建进动锥体运动与多基雷达观测模型,提取出多部雷达高分辨距离像序列中散射点的微动曲线。其次,深入挖掘散射点微动规律,建立了散射点径向位移与锥旋角速度之间的几何约束关系,利用多视角下的线性约束条件实现对锥旋角速度矢量的精确求解。最终,结合微动曲线呈现的进动周期特性,推导计算出角速度的大小与矢量。数值仿真与重构实验表明,该方法在较低的信噪比条件下,对比传统方法能够实现对角速度矢量的稳定估计,具备更出色的抗噪鲁棒性,且利用估计参数重构的微动曲线有效验证了结果的物理一致性 。

    Abstract:

    The midcourse phase of ballistic missile flight is an important stage for early warning, detection, recognition, and interception. After deployment, heavy conical targets such as warheads typically exhibit complex precession motion, a combination of spin and coning, due to unavoidable lateral torque interference. To address the problems that the angular velocity vector is incompletely observable under monostatic and bistatic radar conditions and that existing parameter estimation algorithms heavily rely on observation geometry and are sensitive to environmental noise, this paper proposed an estimation method for the angular velocity vector of precessing targets based on multi-static radar micro-motion curves. First, by constructing a precessing cone motion model and a multi-static radar observation model, this paper extracted the micro-motion curves of scattering points from the high-resolution range profile sequences of multiple radars. Second, by deeply mining the micro-motion laws of scattering points, this paper established a geometric constraint relationship between the radial displacement of scattering points and the coning angular velocity and realized the precise calculation of the coning angular velocity vector using linear constraints from multiple viewing angles. Finally, combined with the precession period characteristics exhibited by the micro-motion curves, the magnitude and vector of the angular velocity were derived and calculated. Numerical simulations and reconstruction experiments demonstrate that, compared with traditional methods, the proposed method can achieve stable estimation of the angular velocity vector under low signal-to-noise ratio conditions, exhibiting superior anti-noise robustness. Furthermore, the micro-motion curves reconstructed using the estimated parameters effectively verify the physical consistency of the results.

    参考文献
    相似文献
    引证文献
引用本文

张荣政,陶政,王勇,张君秋.基于多基雷达的进动锥体目标角速度矢量估计[J].哈尔滨工业大学学报,2026,58(8):79. DOI:10.11918/202601037

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2026-01-09
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2026-08-29
  • 出版日期:
文章二维码