表面改性技术对材料摩擦磨损性能的影响研究进展
CSTR:
作者:
作者单位:

(哈尔滨工业大学 材料科学与工程学院,哈尔滨 150001)

作者简介:

赵辉浩(1995—),男,博士研究生;张雁祥(1985—),男,教授,博士生导师;闫牧夫(1963—),男,教授,博士生导师

通讯作者:

中图分类号:

TH117.1

基金项目:


Research progress on effects of surface modification technologies on friction and wear properties of materials
Author:
Affiliation:

(School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China)

Fund Project:

undefined

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    摩擦磨损是装备服役过程中导致零部件失效、精度衰减与能量损耗的关键因素。通过调控材料表层的化学成分、相组成、缺陷结构与力学梯度,可在保持基体综合性能的同时显著提升耐磨、减摩、抗疲劳及耐蚀能力。本文围绕渗碳、渗氮、碳氮复合渗、离子注入及类金刚石碳(diamond-like carbon, DLC)涂层5种典型表面改性技术,系统综述其改善材料摩擦磨损性能的研究进展,重点比较不同技术对表层组织演化、硬度分布、摩擦行为与磨损机制转变的影响。现有研究表明,上述技术均可通过表层硬化、梯度支撑、残余应力调控、界面化学状态优化及转移膜稳定化等途径,提高表面承载与抗损伤能力,使磨损率通常降低1~2个数量级,并促使磨损机制由严重黏着磨损、磨粒磨损和塑性变形向氧化磨损、轻微磨粒磨损、疲劳磨损或稳定转移膜控制下的低损伤滑动转变。不同技术在改性深度、载荷适应性与工程适用性方面各自具有不同的特征:渗碳适用于重载深层强化,渗氮具有低温低变形优势,碳氮复合渗兼顾表面高硬与亚表层支撑,离子注入适合高精度零件的近表层功能化设计,DLC涂层则在低摩擦与微米级表面功能化方面表现突出。最后,对复合改性、服役导向设计及多技术协同的发展方向进行了展望。

    Abstract:

    Friction and wear are key factors causing component failure, accuracy degradation, and energy loss during service. By regulating the chemical composition, phase constitution, defect structure, and mechanical gradient of the material surface layer, the capabilities of wear resistance, friction reduction, fatigue resistance, and corrosion resistance can be significantly improved while maintaining the comprehensive properties of the substrate. Focusing on five typical surface modification technologies including carburizing, nitriding, carbonitriding, ion implantation, and diamond-like carbon (DLC) coatings, this paper systematically summarized the research progress in improving the friction and wear properties of materials and compared the effects of different technologies on surface microstructural evolution, hardness distribution, friction behaviors, and transitions of wear mechanisms. Existing studies indicate that the above technologies can improve surface load-bearing and damage-resistance capabilities through surface hardening, gradient support, residual stress regulation, interfacial chemical state optimization, and transfer film stabilization, usually reducing the wear rate by 1-2 orders of magnitude and promoting the transition of wear mechanisms from severe adhesive wear, abrasive wear, and plastic deformation to oxidative wear, mild abrasive wear, fatigue wear, or low-damage sliding controlled by stable transfer films. Different technologies exhibit distinct characteristics in modification depth, load adaptability, and engineering applicability: carburizing is applicable to heavy-load deep strengthening; nitriding has advantages of low temperature and low deformation; carbonitriding balances high surface hardness and subsurface support; ion implantation is suitable for near-surface functional design of high-precision components; DLC coatings perform outstandingly in low friction and micron-scale surface functionalization. Finally, this paper prospected the development directions of hybrid modification, service-oriented design, and multi-technology synergy.

    参考文献
    相似文献
    引证文献
引用本文

赵辉浩,张雁祥,闫牧夫.表面改性技术对材料摩擦磨损性能的影响研究进展[J].哈尔滨工业大学学报,2026,58(8):10. DOI:10.11918/202604032

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2026-04-13
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2026-08-29
  • 出版日期:
文章二维码